Jump to content
SAU Community

Recommended Posts

I have acquired a front cut and a stack of rear end parts that is basically taking up space in my driveway so it's all gotta go.

Prices are very fair already but if you'd like to make a reasonable offer feel free. Bear in mind if I have to package and post the item I may be less receptive to low balls.

MORE PICS AND PARTS TO BE UPDATED AS I GO!

Pick up Lower Blue Mountains Sydney.

Bonnet $100 (pick up only at this stage)

Doors $50 each (pick up only)- Driver's door sold, all others still available.

Side mirrors $30 pair or $20 each

Door cards- not in good condition however the fabric parts could be used to upgrade your existing trim- $Make an, offer pick up only

Rs260 (series 1- red trim) door card set in awesome condition $sold

Rs260 )series 1- red trim) front seats $200 pair,

Front guards $50 each (pick up only)

Passenger inner guard liner $30 (pick up only) Driver's side sold

Rear tailgate, complete except for boot lock $150 (pick up preferred)

Dolphin side skirts and rear bar, would need some repairs $SOLD

Block $200 (head sold already, motor had low compression on 6)

Op6 turbo $SOLD

Gearbox $SOLD

Manual conversion $SOLD

Steering wheel (manual with airbag) $150

Wiring looms $50 each

Rear diff $400

Driveshafts $100 each

Hubs $50 each

Rear brakes $50

Complete rear cradle (diff, shafts, cradle, hubs etc) $600

Front brakes $80

Brake master and booster $40 each

ABS unit $80

Fuel pump/cradle $50

Stock suspension with lowered springs $SOLD

Headlights- Passenger side only available $50

Everything else you can see is for sale, make an offer!

IMG_0679_zpsc9721e6a.jpg

IMG_0680_zps3c9a6d3e.jpg

IMG_0683_zps4da624ab.jpg

IMG_0685_zpsd6653b3c.jpg

IMG_0694_zps09fb3cba.jpg

IMG_0704_zps7df6d7a4.jpg

IMG_0699_zps2762d7cb.jpg

IMG_0698_zps90231199.jpg

IMG_0695_zpse479ca6f.jpg

IMG_0696_zps1edbddc0.jpg

IMG_0697_zps1627d9e9.jpg



Sold already:
Head, coilpacks, intercooler, front bar, drivers side driveshaft, rims, centre console, power steering pump, 4wd pump, driver's door, drivers side inner guard liner, washer bottle.

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hey! I am after the two drivers side doors.

I believe they'll fit an S1. Only downside is, I'm in Melbourne. Can you let me know how much it would be to ship to Postcode 3147 in Victoria?

Thanks

Hey! I am after the two drivers side doors.

I believe they'll fit an S1. Only downside is, I'm in Melbourne. Can you let me know how much it would be to ship to Postcode 3147 in Victoria?

Thanks

hi mate, i should have put this in the thread but would prefer pickup on the doors as they tend to get damaged in transit.

First post updated, some parts (mainly panels) are a kent to wrap and post so at this stage they are pick up only. All other parts I'm more than happy to arrange shipping at cost.

How good is the bonnet? And headlights and are they xenons? Shocks good?

bonnet is pretty good

yes they are zenons

shocls cant say as the car was chopped in half and sent from japan

Hi mate what condition is the rear tie rod ends in?

tie rods are now on my stagea so gone sorry

no chance you have spare keys do you?

Comes with the door locks and ignition barrel

passenger side headlight, if willing to post to sa 5114 and whats the condition? thanks mate

Little bit foggy but pretty good ill get some pics

Ecu still there?

Yea mate 100 delivered

Comes with the door locks and ignition barrel

Little bit foggy but pretty good ill get some pics

Yea mate 100 delivered

Pm me your bank details and ill send you money and address etc

Thanks mate

You will have 2 excuse my ignorance, by the looks of it it is a 2wd gearbox?
Also what do you know about the diff? Ratio ? Mechanical ?

You will have 2 excuse my ignorance, by the looks of it it is a 2wd gearbox?

Also what do you know about the diff? Ratio ? Mechanical ?

Gearbox is four wheel drive, diff is 4:4 viscous

can you chuck up some photos of the door cards please dude

Rs260 cards or the stock ones?

How much for the shocks?

150. Stock shocks with lowered springs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...