Jump to content
SAU Community

Recommended Posts

I have acquired a front cut and a stack of rear end parts that is basically taking up space in my driveway so it's all gotta go.

Prices are very fair already but if you'd like to make a reasonable offer feel free. Bear in mind if I have to package and post the item I may be less receptive to low balls.

MORE PICS AND PARTS TO BE UPDATED AS I GO!

Pick up Lower Blue Mountains Sydney.

Bonnet $100 (pick up only at this stage)

Doors $50 each (pick up only)- Driver's door sold, all others still available.

Side mirrors $30 pair or $20 each

Door cards- not in good condition however the fabric parts could be used to upgrade your existing trim- $Make an, offer pick up only

Rs260 (series 1- red trim) door card set in awesome condition $sold

Rs260 )series 1- red trim) front seats $200 pair,

Front guards $50 each (pick up only)

Passenger inner guard liner $30 (pick up only) Driver's side sold

Rear tailgate, complete except for boot lock $150 (pick up preferred)

Dolphin side skirts and rear bar, would need some repairs $SOLD

Block $200 (head sold already, motor had low compression on 6)

Op6 turbo $SOLD

Gearbox $SOLD

Manual conversion $SOLD

Steering wheel (manual with airbag) $150

Wiring looms $50 each

Rear diff $400

Driveshafts $100 each

Hubs $50 each

Rear brakes $50

Complete rear cradle (diff, shafts, cradle, hubs etc) $600

Front brakes $80

Brake master and booster $40 each

ABS unit $80

Fuel pump/cradle $50

Stock suspension with lowered springs $SOLD

Headlights- Passenger side only available $50

Everything else you can see is for sale, make an offer!

IMG_0679_zpsc9721e6a.jpg

IMG_0680_zps3c9a6d3e.jpg

IMG_0683_zps4da624ab.jpg

IMG_0685_zpsd6653b3c.jpg

IMG_0694_zps09fb3cba.jpg

IMG_0704_zps7df6d7a4.jpg

IMG_0699_zps2762d7cb.jpg

IMG_0698_zps90231199.jpg

IMG_0695_zpse479ca6f.jpg

IMG_0696_zps1edbddc0.jpg

IMG_0697_zps1627d9e9.jpg



Sold already:
Head, coilpacks, intercooler, front bar, drivers side driveshaft, rims, centre console, power steering pump, 4wd pump, driver's door, drivers side inner guard liner, washer bottle.

  • Replies 60
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hey! I am after the two drivers side doors.

I believe they'll fit an S1. Only downside is, I'm in Melbourne. Can you let me know how much it would be to ship to Postcode 3147 in Victoria?

Thanks

Hey! I am after the two drivers side doors.

I believe they'll fit an S1. Only downside is, I'm in Melbourne. Can you let me know how much it would be to ship to Postcode 3147 in Victoria?

Thanks

hi mate, i should have put this in the thread but would prefer pickup on the doors as they tend to get damaged in transit.

First post updated, some parts (mainly panels) are a kent to wrap and post so at this stage they are pick up only. All other parts I'm more than happy to arrange shipping at cost.

How good is the bonnet? And headlights and are they xenons? Shocks good?

bonnet is pretty good

yes they are zenons

shocls cant say as the car was chopped in half and sent from japan

Hi mate what condition is the rear tie rod ends in?

tie rods are now on my stagea so gone sorry

no chance you have spare keys do you?

Comes with the door locks and ignition barrel

passenger side headlight, if willing to post to sa 5114 and whats the condition? thanks mate

Little bit foggy but pretty good ill get some pics

Ecu still there?

Yea mate 100 delivered

Comes with the door locks and ignition barrel

Little bit foggy but pretty good ill get some pics

Yea mate 100 delivered

Pm me your bank details and ill send you money and address etc

Thanks mate

You will have 2 excuse my ignorance, by the looks of it it is a 2wd gearbox?
Also what do you know about the diff? Ratio ? Mechanical ?

You will have 2 excuse my ignorance, by the looks of it it is a 2wd gearbox?

Also what do you know about the diff? Ratio ? Mechanical ?

Gearbox is four wheel drive, diff is 4:4 viscous

can you chuck up some photos of the door cards please dude

Rs260 cards or the stock ones?

How much for the shocks?

150. Stock shocks with lowered springs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...