Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

no man I don't. Cuz I live on the GC and not western Brisvegas

R I c. I miss mt nebo :( havent even really had a good fang around tambo either since I have moved close (2years) lol

R I c. I miss mt nebo :( havent even really had a good fang around tambo either since I have moved close (2years) lol

yeah Mt Tambo is a nice drive but is heavily monitored theses days and wayyyy to many accidents which does not help :(

 

 

seriously it was sitting at lights when it happen didn't even boost it cause car was still cold.... so from that video you would look for a split ic piping ect?

Sounds very air leaky to me. After looking for air leaks unplug each coil pack. If the idle doesn't change you have found your problem cylinder. Did you say you unplugged the afm and it made no difference? I have had a failed afm and failed wiring to my afm cause issues similar to yours. My money is still on air leak though.
  • Like 1

How hard is a slappa RB30 ?

I now have a metal on metal ticking sound :angry:

I'm thinking I have lost 1 or maybe 2 cylinders, comp test next.

While pulling out the coil packs when running made the car want to stall on all, some didn't change much when plugging back in but did make a change..

PowerFC install stops the car hunting but as the car warmed up and idled dropped it wanted to stall causing it to hunt.

Anyone got a engine crane?

Sounds very air leaky to me. After looking for air leaks unplug each coil pack. If the idle doesn't change you have found your problem cylinder. Did you say you unplugged the afm and it made no difference? I have had a failed afm and failed wiring to my afm cause issues similar to yours. My money is still on air leak though.

Yeah unplugged AFM then started car on stock ECU ran the same harder to start but did run

PowerFC installed to rules out ecu. Am unplugged wouldn't run. AFM installed it runs but missing..

Did the spray carbie cleaner around hoses and intake gasket.. no notable change..

Who can recommend a Mechanic Southside close to beenleigh ? If only ERD was open still.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • I do like the look of these things (minus the ugly flat top surface with the text) https://rajabracing.com.au/product/nissan-rb25det-neo-intake/ Retains the OEM bottom runners, for that phat low range. If you want response king, maybe go with the Plazmaman pipe work, here's my old setup from a decade ago
    • Torque will suffer greatly, will try and find dyno difference on r34 with gt30 between stock and plazmaman short runner. like 2000-3000rpm power rdip at least. EDIT Green line is stock manifold, others is plazmaman short runner I also had a rb25 with greddy and q45 TB back in the day and was shit daily driving. Plazmaman top plenum with stock runner and DBW made it so much nicer.
    • Welcome to !
    • As I've said elsewhere, I am using the stock intercooler piping path in the engine bay, and a return flow cooler, and making ~250 rwkW (without any effort put into trying to turn it up past there just yet) and expect to be able to make some more, and frankly, I would be perfectly happy with 260-270rwKW. This is peak road Skyline usability territory. You go past there and, sure, the car will snap necks more when it's on boost, but it will also break shit all the time, cost a (even larger) fortune in tyres, etc etc. Anyway, I also do not like the over-the-fan pipe path, and you don't have to do it.
    • I see, honestly I’m not too fussed about the looks. The only reason to go plenum is to make the piping easier instead of the classic over the rad etc. 
×
×
  • Create New...