Jump to content
SAU Community

Mugabetown - Whoretownin' At It's Worst.


Recommended Posts

Don't suppose anyone knows the part number of the GTR spoiler rubber/gasket kit?

this is all i've been able to find, but getting it from the states seems excessive, will probably pop down to the local nissan parts shop later today.

Edit: Bolt was loose...

Don't suppose anyone knows the part number of the GTR spoiler rubber/gasket kit?

this is all i've been able to find, but getting it from the states seems excessive, will probably pop down to the local nissan parts shop later today.

Edit: Bolt was loose...

was going to say, pretty sure Ants just did a full detail and replacement of his 32GTR spoiler. Cleaned it all up and replaced bolts and gaskets etc. There should be part numbers etc in his build thread. If not just PM him I'm sure being the numbers man he is, he will remember.

Morning Ants.

How goes the Ant Eater?

she goes well mate. I need to replace the nitrogen canister for the 4WD so am on a mission to get that resolved soon.

Sooo much I want to do with the GTR so little disposable income and time

she goes well mate. I need to replace the nitrogen canister for the 4WD so am on a mission to get that resolved soon.

Sooo much I want to do with the GTR so little disposable income and time

I feel your pain about disposable income. I had to get a second job to feed the addiction

was going to say, pretty sure Ants just did a full detail and replacement of his 32GTR spoiler. Cleaned it all up and replaced bolts and gaskets etc. There should be part numbers etc in his build thread. If not just PM him I'm sure being the numbers man he is, he will remember.

this ^

Check the condition of the stay brackets Pete as they tend to corrode

was going to say, pretty sure Ants just did a full detail and replacement of his 32GTR spoiler. Cleaned it all up and replaced bolts and gaskets etc. There should be part numbers etc in his build thread. If not just PM him I'm sure being the numbers man he is, he will remember.

Good call,

Figured out what i did wrong with part number, didn't add the 05U00, thanks for documenting Antz!

The bolt that was loose was seriously loose, eg finger tight, so will see if that has stopped the leaks for now...

Anyone got a slide hammer I can borrow?

This sounds serious. Is this for the tissuebox?

Don't suppose anyone knows the part number of the GTR spoiler rubber/gasket kit?

this is all i've been able to find, but getting it from the states seems excessive, will probably pop down to the local nissan parts shop later today.

Edit: Bolt was loose...

Pete, if you're gonna rid yourself of that wing, I know someone who'll happily buy it from you, ME! ;) I figured you're not, but it was worth a shot.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Messing around with. Twin kit for. Rb30/26  
    • For fuelling the Haltechs have O2WB fuel controllers. Very useful for helping tuning VE and correcting for *small* mistakes. Of course if your injector/cam/trigger/sensor data is just wrong (or for a GTT which is not a GT) then you will get impossible reactions to things. I am sure you know this already but the reason people don't typically put haltechs (or any Aftermarket ECU) on GT's is because there's practically no real gains to be had - So this knowledge won't be commonplace.
    • Can someone tell me if the cracks seen in the rear sway bar bushings in these photo's is unacceptable from a roadworthy point of view?  
    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
×
×
  • Create New...