Jump to content
SAU Community

Recommended Posts

This was my first GTR35 set which I completed for a local car. I ended up attempting the True Quad setup and I was pretty happy with the way they turned out. I learnt quite a lot from this first set. Ill know what to do and what not to do for future sets.

Enjoy the pix....

HL specs:

* JDM GTR35 headlights

* Quad Mini H1 5.0's

* White painted cutoff shields

* TRS side emitting LED strips for the new "Parker" setup

* Mini Gatling Gun shroud (Low beam housing) + regular Gatling Gun shroud (High beam housing)

* Full Satin Black finish using: VHT Prime coat SP305 "Satin Black"

CLear lense pulled off

image_zps922187d4.jpg

OEM low beam projector vs Mini H1 5.0.

Both lense holders are lined up. Very similar sized projectors

image_zps9b55c267.jpg

image_zps0c2ca9d6.jpg

2.5" Mini H1 lense vs Slightly smaller OEM lense (forgot to get a measurement)

image_zps2b6cb253.jpg

Mini H1 fits like a glove in the OEM low beam reflector bowl

image_zps9d17ed5e.jpg

image_zpsd4d37155.jpg

Even the OEM headlight bezel fits around the Mini H1 without any modification. Looks just like factory :) Happy days!!!

Anyone that wants to do a projector upgrade on a GTR35 HL will have the least hassle free experience with a Mini H1.

* minor dremelling of the housing underneath the projector

* JB Weld / Stik Mini H1 to the OEM reflector bowl

* Fit OEM bezel (without modifiaction)

Done deal!!

image_zpsf35f8ee1.jpg

image_zps6c8b782a.jpg

image_zps7d52c0e8.jpg

image_zps7df7dbca.jpg

Bottom section of the OEM projector still needs dremelling

image_zps64f279f2.jpg

This is the dremelling I was talking about to fit the Mini H1. This helped with rotational alignment.

image_zpscaf62fcf.jpg

Close up

image_zps8f890798.jpg

Both projectors fixed in place using JB Stik. You can see the M4 nuts & bolts thats helping to extend the Mini H1 in the High beam housing

image_zpse37c4104.jpg

Side emitting LEDs installed and showing off the new "Parkers"

image_zps4334301d.jpg

Heres a mock up of how I want the Gatling Gun shrouds to look

image_zps7b1ea104.jpg

image_zps75199352.jpg

The first initial cut on the Mini GG. I was still afraid to hack into the OEM low beam bezel incase I couldnt pull off the look. Once you cut into it theres no turning back...

image_zps680d2ca8.jpg

Sliding the Mini GG inplace... Still requires a lot more cutting..

image_zps527bffc3.jpg

Finally bit the bullet!!! Had no choice as the Mini GG shroud was not going to "slip" in any further without cutting the OEM bezel

image_zps5824cf9b.jpg

image_zpse9fd7912.jpg

More cutting leading to a better fit

image_zps77751578.jpg

Getting closer and closer

image_zps36149037.jpg

The final look of the OEM low beam bezel. No more cutting

image_zpsa14707b6.jpg

Mini GG trimmed to a final depth of 45mm for the best fit

image_zpsaf2b50f7.jpg

Test fit

image_zps46935961.jpg

image_zps273465ac.jpg

image_zpsc77b898c.jpg

The first initial cut of the OEM high beam bezel

image_zps2385fe23.jpg

Test fit of both Gatling Gun shrouds with electrical tape holding them in place

image_zpscba50695.jpg

image_zpsaaa803c7.jpg

image_zpsd9cedb87.jpg

Gardening wire hold the Gatling Gun shroud to the OEM headlight bezel

image_zps65072d6b.jpg

image_zpsb4d351cc.jpg

JB Stik applied as the primary adhesion

image_zps73bc3850.jpg

JB Stik finally cured and hold the shrouds in place

image_zps3da2f000.jpg

Dressed in Black

image_zps1fd419b2.jpg

image_zps11a37b65.jpg

Turn signal housing masked up before the Satin black finish

image_zpsf2b38d5b.jpg

image_zpsbbe8f2de.jpg

Assembly line

image_zps00512f4d.jpg

All that left to do is seal the HL up

image_zps7f86314b.jpg

image_zps7e60c69d.jpg

Testing the LED strips

image_zps57faaa58.jpg

H1 bulb now protrudes from the back of the high beam housing. The dust cap no longer fits.

image_zps652f68cd.jpg

Giving my plastic welder the vital info he needs: ">PP

That looks amazing :woot: Seems like very fiddly work with a lot of thought put into what to cut/what not to, but in the end looks like a concept R35 headlight, just 100x tougher. Awesome!

Edited by colourclassic

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...