Jump to content
SAU Community

Recommended Posts

Hey guys, i've got a bunch of R33 performance bits taking up space, so they're all up for sale. Located in Sydney for pickup or I can post:

Kaaz 2-way 4.1 LSD Diff in R33 housing - $850 ono

post-35556-0-51984800-1379333992_thumb.jpg

Set of 18x9.5" ROTA Grid wheels at tyres. Great condition, one of the wheels has some light gutter marks but the others have basically none - $1200 ono

All are 5x114.3, 18x9.5" +38. Tyres are 235/40 Federal ss595 - rears have some camber wear and are probably not roadworthy - fronts have a bit left at maybe $25% above markets

post-35556-0-17544700-1379334014_thumb.jpg

Greddy style rb25 intake plenum, polished/silver. Includes 80mm throttle body, TPS, AAC valve, etc - $450

post-35556-0-03794300-1379334062_thumb.jpg post-35556-0-27842800-1379334075_thumb.jpg

RB25 Stainless steel high mount manifold & external wastegate - $350 ono

post-35556-0-10589800-1379334255_thumb.jpg post-35556-0-47184100-1379334276_thumb.jpg

Matching the above - stainless custom dump/front pipe (garrett 4-bolt flanged) - $100

post-35556-0-34474900-1379334558_thumb.jpg

Blitz Dual SBC Spec-S electronic boost controller. Includes solenoid, all wiring looms - $300 ono

post-35556-0-43545300-1379334387_thumb.jpg

Bosch 040 fuel pump and R33 Cradle - $120 ono

post-35556-0-21182000-1379334320_thumb.jpg

HKS Hiper-D height and damper adjustable coilovers. Great condition - $700
Rears were originally for GTR only but have been modded to suit R33 Gts-t

post-35556-0-93999100-1379334310_thumb.jpg


Return flow FMIC & piping kit for R33 Skyline Gts-t - painted black.
Pretty good condition, but the lower return pipe & end tank have some scrapes on the under side - $250 pickup only
post-35556-0-44984300-1379334512_thumb.jpg post-35556-0-28848800-1379334523_thumb.jpg

3" catback exhaust system. Front section is X-force, rear is a stainless a-spec straight through dual tip - looked great on the car - $200 pickup only
post-35556-0-08221500-1379334577_thumb.jpg post-35556-0-26989300-1379334587_thumb.jpg

SRI Bolt on wheel spacers, 5x114.3 - 20mm and 15mm - $75/pair
post-35556-0-93527700-1379334095_thumb.jpg post-35556-0-03926900-1379334330_thumb.jpg

Complete rear Hicas lock bar & arms, ready to bolt on - $100

post-35556-0-59885800-1379334347_thumb.jpg

  • Like 1

What brand is the exhaust manifold and gate? Cheapie? How much use? What flange? Suit stock rear turbo housing? Pretty interested.

Edited by FordyR31

Kaaz diff, fuel pump, dump pipe sold

Coilovers and hicas bar on hold pending pickup this weekend

Stainless exh manifold is t3 flanged, 38mm adjustable wastegate, can't see any brands but they're both in top condition

HKS coilovers Kaaz diff, Bosch 040 & hicas lockbar sold. Still have all the rest

Price drop!:

Greddy style plenum - $400

Stainless exh manifold & gate - $300

ROTA wheels - $1000

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...