Jump to content
SAU Community

Fmic Install - Diy Or Not?

Pedestrian

By Pedestrian,
in Engines & Forced Induction

 Share

Recommended Posts

Pedestrian Rookie

Pedestrian

Posted
Posted

Hey all,

Have a FMIC kit ready to go on my 33 gtst, been meaning to give installation a go but having a hard time finding enough free time to get it done.

Been reading a fair bit on install guides and the like, but considering paying someone else to install it for me since i would have to buy necessary tools like die grinder etc. to do the job properly (not keen on going anywhere near my front bumper with an angle grinder) - and money would probably be better spent on install.

Anyone who's paid for install have any idea what's reasonable for a FMIC install, or even anyone in Perth on here keen on doing it?

Or is it really that easy it's worth doing DIY?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/432241-fmic-install-diy-or-not/
Share on other sites
MatthewT85 Proficient

MatthewT85

Posted
Posted

i did mine myself, JJR return flow type, i bought a rotary tool from bunnings to cut the front bumper which was pretty easy once i got the hang of it, the bits can be easy to snap if you are learning...

i wasnt comfortable cutting the reo bar and so got an exhaust shop to do it, so only really ended up costing under a hundred, and i have used the rotary tool for other things, so found it worth buying...

have no idea how much someone would charge but it took me 2-3 hours, obv first time and taking it slowly, and extra slow on the front bar(cutting bits away slowly) it really is an easy thing to do...

Pedestrian Rookie

Pedestrian

Posted
  • Author
Posted

Ok cheers, mine is the kit that goes up both sides so will need to cut a 3" hole for it (have this already - dont want to be like my mate who cut a rectangle with an angle grinder -.-)

Will give it a crack and see how I go what was this rotary tool called, roughly how much was it?

MatthewT85 Proficient

MatthewT85

Posted
Posted

what was this rotary tool called, roughly how much was it?

like a dremel just diff brand i went with ozito, allows you to cut plastic and stuff, if you get one just becareful if you cut too slow i think if causes the plastic to heat up and melt a bit, but too fast and you break the bit, they give you heaps so i just learnt...

http://www.bunnings.com.au/ozito-170w-42-piece-rotary-tool-kit_p6290175

thats the one i got, and yeah like scotty said, i went with a return flow type so i didnt have to cut a hole in the body, i know cutting the reo bar is defectable, but at least its fixable also its hidden a little

  • Like 1
MatthewT85 Proficient

MatthewT85

Posted
Posted (edited)

yeah you only really have to take off a small triangle on either side of the bottom part of the reo bar for the cooler, cutting of any part of the body is defectable as far as i know, its obv something you cant hide when theres a hole in front of the fuse panel area, like i said if you get defected for the reo bar, you can take it off and replace with an untouched one....

Edited by MatthewT85
SkudR33 Proficient

SkudR33

Posted
Posted

yeah you only really have to take off a small triangle on either side of the bottom part of the reo bar for the cooler, cutting of any part of the body is defectable as far as i know, its obv something you cant hide when theres a hole in front of the fuse panel area, like i said if you get defected for the reo bar, you can take it off and replace with an untouched one....

I looped my piping underneath the intercooler and returned it to the stock pipes on the right side of the engine bay - i still had to cut out of the chassis but it's don't think its in an obvious place!

skylineplumbing Newbie

skylineplumbing

Posted
Posted

hi there, not sure where to post posts I just started this account

but im having trouble with my new fmic.

ive got two pictures but don't know how to up load it..

my issue is my new after market intercooler kit/piping did not come with a nipple for the boost hose or whatever it is too go in.

now im getting mixed feed back from other people saying this and that. could someone please help me out or tell me where to post this thank you very much.

Michael.

there is two stock inter pipes

one has the standard nipple on it and that close to the throttle body

and the other pipe which is below that pipe runs into the turbo?

now I have to install a nipple on my new intercooler pipe do I

A.. put it on the top piping which is the closest to the throttle body but on the intercooler piping

B.. the intercooler piping coming of the turbz. thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • myrbgivesmeheadaches
      RB25DET NEO Cylinder Head

      By myrbgivesmeheadaches · Posted

      Did this end up working? Did you take some pictures?
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • Duncan
      V37 Suspension change

      By Duncan · Posted

      You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...