Jump to content
SAU Community

Recommended Posts

UPDATE: just blew the old turbo, defiantly rejoicing over my decision to buy stock turbo. Glad i didn't throw on fuel rails and try to tune that setup, like some suggested haha.

Question: can i limp a blown turbo around if i stay off boost for a week?(no smoke yet)

don't blame the turbo when you're the dickhead that was driving it and trying to rev it past 4k with no tune and popping cooler pipes..even though "SOME SUGGESTED" you shouldn't even be driving it...

just keep driving it mate she'll be right....haha!!!!...:dry:

don't blame the turbo when you're the dickhead that was driving it and trying to rev it past 4k with no tune and popping cooler pipes..even though "SOME SUGGESTED" you shouldn't even be driving it...

just keep driving it mate she'll be right....haha!!!!... :dry:

Not blaming the turbo haha, the plan to go back to stock was so i could thrash the rb with a safe tune. Try NOT driving like a dickhead when it's your first skyline and theres meat on the tyres x]

No one has asked this so I'm going to.

Why did you buy a heavily modified skyline if you wanted something stock? Surely you paid way more than it was worth as well.

Well, You nailed it brother. Costs more than what it was worth, and a headache and a half. Being straight up, i had no idea what to look out for when buying a car, i checked for oil leaks, service history and all panels were straight and working.

The big turbo kinda suckered me in, plus the engine was literally just put back together after being machined. Also, i didn't really think it was a big modification and if necessary i had money at the time to deal with a fix if it was required.

All you needed to fix your car wss a tune from the get go. And a few things here and there. You have taken years off its life punting it untuned and you have lost money because no one will buy a broken turbo.

Without money for a tune, tuning is out of the question. Still questioning my friends diagnosis of a blown turbo... there is a change in the whistle, but it's a very small change and it still spins without any clunking. Could still potentially be a vacuum leak or seals dead. Regardless of that, since powercruise is just around the corner where do you suggest i tune my car with all the tuners in perth (c-red,pcp, japwreck, allstars,ovaboost etc) busy till late october? (I've been to every tuning garage in Perth finding the cheapest quotes.)

Edited by iTwix

I dont see how you had no money. You went and bought all these stock bits for your car, all up you would have been a few hundred bux off a tune.

I think you need to get your priorities straight or just sell the bloody thing.

I dont see how you had no money. You went and bought all these stock bits for your car, all up you would have been a few hundred bux off a tune.

I think you need to get your priorities straight or just sell the bloody thing.

If you tune a pig with shitty parts, it's going to be a fast pig. Parts needed to be replaced, and since they don't regenerate i had to pay for them. As i just said twice, i can't f**king tune it when all the shops are booked out, but i'm waiting in line.... can't do much besides wait, so whats your problem?

I think your best option is all star garage.

Few people on here use them and have said good things as well.

Maybe take it into them after saving some coin?

Also I would take the intercooler pipe and get someone to put a bead on it. That will stop it popping off :)

I think your best option is all star garage.

Few people on here use them and have said good things as well.

Maybe take it into them after saving some coin?

Also I would take the intercooler pipe and get someone to put a bead on it. That will stop it popping off :)

Yeah they seemed like nice guys :D

Intercooler pipe has a bead, but it's got a shit joiner clamped with a radiator hose. i have new intercooler pipes ready and waiting with ribs on the ends and silicon joiners :)

Nice work dude.

It looked really loose when you put it back in.

I wouldn't expect it to hold if you were able to push it back in and just leave it.

Yeah, just found out it wasn't my turbo blown, just that joiner has become very loose, loosing boost. i used one of my proper clamps from the new kit and it's back up to it's usual power and noises. I just have to granny it around now because i don't have a failsafe for overboost D:

Nice work dude.

It looked really loose when you put it back in.

I wouldn't expect it to hold if you were able to push it back in and just leave it.

i very strongly agree with you after learning more about jap cars. Learn from my mistakes i guess :P

This thread makes me :domokun: .

Money should've been spent better on getting a workshop to go over the mods.

You really should sell this and buy a stock R33 to learn with.

For the third time, money WILL be spent at the shop, i'm just waiting for my booking. This post makes me :domokun: .

Honestly. Go find an rb25det for 2k. Drop it in and part yours out. In the long run you will have hardly spent anything. You are wasting time and money. For all you know the car has shot pistons as well. Wouldn't surprise me looking at the work that has been done.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...