Jump to content
SAU Community

R32 Oem & Nismo 'optional Parts' - Images Are Here. Maybe Someone Has Better Copies?


Recommended Posts

  • 2 weeks later...

8 years ago, I bought a large box of left over parts from a 32 wreck. Looked inside it yesterday and found this -

5a5a2771-ce9c-4dce-b21c-766f316659ea_zps

Looks to be the optional footrest cover. Considering putting it on now. Might give it a clean.

There heaps better than the one that comes with the GTR R34 Race pedal set (it has a plastic one with metal pad and flexes badly)

The one in your Pic is awesome and solid as. There is already holes in the body to bolt it into :)

  • Like 1

Someone give me an R32 VIN and I will see if there is anything on Fast? Found some cool shit for the R33 the other day when i was looking through. All these Navan (I think) extras. Including Recaro's, GPS stuff as well as lots of other things. Maybe this stuff will show up on later model R32's (Not sure if they are GTR spefic etc?)

  • 1 year later...

I have a few items that are in those brochures.

jmhLmyS.jpg

1iPBA48.jpg

These are not in the brochure, think they came out during r33 era? They are old though.

AF5eyFh.jpg

Jyll95W.jpg

Horn and wheel

I4Jc9yH.jpg

0mYFV7a.jpg

f5JkV1b.jpg

I have seen the old school intercooler, but they are never in good condition so I always pass on them. Not to mention, they are still expensive lol. They are made by ARC.

I still refer to this periodically...

PartsCatalogue.jpg

'Tis nice to get a collection...

LMGT1-2_zpshnuf90ax.jpg

Much enjoyment these days in the "hunt"

LMGT1-1_zps4xr6malm.jpg

Even though the thread is two yrs old, finding something rare just becomes all the more enjoyable.

P1060330_zpsflm5pby0.jpg

Interior has much goodness too.

Interior-1_zpsnpxshozz.jpg

The kill switch.

Kill%20Switch-3_zpsddmlnllc.jpg

Steering wheel.

Steering%20Wheel-1_zpsltwliosp.jpg

Floor Mats - Steel badge

Floor%20Mat-1_zpsle1fhj7l.jpg

Kick Plates - Aluminium badge

Badge-3_zpsdr56lcdy.jpg

Yup, 'tis fun to be on the prowl

  • Like 1

The Rear End.

Sticker-2_zpsz6c61krr.jpg

Hidden is the Nismo Fuel Pump, but the Rear Strut Brace is also a good thing.

Strut%20Brace-5_zpsnedvxxkz.jpg

Bootlid Sticker is like the cherry on the cake.

Sticker-3_zps8qlpfa9a.jpg

Many thanks to Wongy, Anfanee and Sinista32 for giving me the heads up on things. What a wonderful network!!!!

  • Like 1

The Engine Bay

Engine%20Bay-1_zpsvmz7fbss.jpg

Nismo 555cc Injectors, Fuel Regulator and Oil Cap.

Oil%20Cap-5_zpsggwqnbhj.jpg

And there's always a ring-in - whilst I'm waiting for the Nismo Radiator Cap from Bangkok.

Badge-1_zpsjjuvzzq9.jpg

...but it looks good! Lol.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I was 99% sure the standard one is long enough to get there, you might just have to change the throttle orientation. If not, I remember someone having used an r31 cable instead, but that is probably harder to find than r33 by now...
    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
×
×
  • Create New...