Jump to content
SAU Community

Wanted: R33 Skyline Series 2 Gts Return Bov Pipe

jhall82

By jhall82,
in Wanted to Buy

 Share

Recommended Posts

RANDY Veteran

RANDY

Posted
Posted

Err stock BOV return line is metal.

veGeFUK.jpg

Well, I assume he's talking about the short bit of rubber (2-3inches) that joins that metal pipe to the metal outlet of the BOV?

I think I replaced mine with a silicone item, and it's just a straight piece. If that's the bit you need (OP), just go to an auto store and buy the right ID size pipe, (sold by the metre usually) and cut it to size.

If that fails, go to supercheap or some shop like that an look through their pile of radiator hoses. I'll bet a small car uses something that size for coolant or something.

Link to comment
Share on other sites
protecon Contributor

protecon

Posted
Posted

Well, I assume he's talking about the short bit of rubber (2-3inches) that joins that metal pipe to the metal outlet of the BOV?

I think I replaced mine with a silicone item, and it's just a straight piece. If that's the bit you need (OP), just go to an auto store and buy the right ID size pipe, (sold by the metre usually) and cut it to size.

If that fails, go to supercheap or some shop like that an look through their pile of radiator hoses. I'll bet a small car uses something that size for coolant or something.

Granted, except they asked for "After return pipe from BOV to turbo inlet for series 2 skyline GTS-t urgently."

A short piece of rubber isn't a return pipe to the intake.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Rejoin from hell

      By MBS206 · Posted

      Chatting one someone recently at racing them at QR. They say you can't take turn 2 in one flat stick in 4th. They don't have the torque to pull them selves straight, so make sure you're ringing it's neck out in 3rd instead
    • MBS206
      Should you buy cheap Chinese tyres?

      By MBS206 · Posted

      Many years ago when I bought my FG XR6T, it came with bald tyres on the back (think pretty much smooth for most of the tread) and brand new Kinforest cheap shit tyres on the front. In the rain, I had more grip in the bald ass tyres on the back, than the brand new Kinforest. To the point you couldn't drive off at a set of lights and turn the corner. Car would only go straight. Very quickly all four tyres were replaced.   A few years back on a VF SV6 I had, it came with brand new chineesium tyres. In the wet at 90kmh, old 1990s tray back tradie utes could corner faster than me. There was one corner on a freeway, in a 90 zone, it's not even marked to reduce speed for those curve, it's not a hard corner, I could put the LandCruiser on mud tyres through with ease (it would easily do the corner in the wet I reckon at 120kmh), the VF however couldn't get through it at 80, as it would want to slide out.   Cheap tyres aren't worth the risk. I like decent brakes, and decent grip.
    • Dose Pipe Sutututu
      R32 GTST - 600KW+ RB28/CD009 Build

      By Dose Pipe Sutututu · Posted

      It shouldn't swell like that, (just looked it up) it should say SAE J30R10  
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Anyone here a submersible fuel hose expert? I pulled my hanger out again for unrelated issues and noticed the hose I popped on last week has already swollen. This is Gates 27093 submersible hose. I've waiting on a response from Gates, but this surely can't be normal? This is on pump gas, not E85.  Is swelling a tad possibly normal? I've also been fighting with my power steering belt.... I've now tossed one and killed two. I just realigned my pulleys again, hoping this time it stays on. It doesn't like high rpm.   
    • Rezz
      Japan Scrapbook

      By Rezz · Posted

      Don't want to side track from the thread too much (don't want to upset the thread starter's run from 2007) so here's some old rusted Nissan Laurels in a parking lot in Nishinomiya, Hyogo-ken:
×
×
  • Create New...