Jump to content
SAU Community

31/7 - International 7th Skyline Day

SKY031

By SKY031,
in National Events

 Share

Recommended Posts

SKY031 Grand Master

SKY031

Posted
Posted

July 31 is recognised internationally as 7th Skyline day.

This year we'd like to make it a big event right across Australia.

We at "R31 central" would like to send out an invitation to all owners of 31's to participate. (YES, even you Pintara owners!!)

We've got a photoshoot at Nissan being organised in Victoria, and would like to encourage all the other states to follow suit with similar events.

Even if you can't attend an event on this day, take your car somewhere pretty, and take a photo, send us your pictures, and we will add them to our "7th Skyline Day gallery", which will then be submitted to the gurus at R31 House in Japan.

Please keep an eye on the upcoming events section in your state for more details if you would like to be involved, or feel free to contact us for more information.

Victoria

Queensland

South Australia

Western Australia

A.C.T.

Tasmania

And if you're in N.T. and would like to get involved, we're more than happy for you to participate!

Link to comment
Share on other sites
SKY031 Grand Master

SKY031

Posted
  • Author
Posted
Is it only Oz delivered Skylines?

It's an International event, which started in Japan... so it's all R31's, (even the South African ones)

Because we also have R31 Pintaras in Australia, we're broadening the scope and asking the Pintaras to play a part in this too.

An R31 is an R31.

Aus GTS/GTS2, GTS, GTSX, Passage GTS-R, GX, GXE, Silhouette, Ti, Executive, Pintara,or even a wagon...... if it's a 31, we want to see it!

:D

Link to comment
Share on other sites
  • 1 month later...
  • 3 weeks later...
predator Grand Master

predator

Posted
Posted

Was a great day for it.. and good number of attendees up here in QLD.

We went for a bit of a casual drive up through Mt Nebo, across to Mt Glorious, and then down and back to lunch at Goodna. Overall about a 3 hour drive or so.

Look forward to some shots from around Australia, and maybe even around there world!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chris_Guthrie
      Misfire/stalling issues

      By Chris_Guthrie · Posted

      Any recommendations on a decent replacement manifold that doesnt break the bank or require additional mods for the stock turbo setup? I figure if I'm going to pull the manifold off anyway to fix the studs might as well replace it. 
    • Chris_Guthrie
      Misfire/stalling issues

      By Chris_Guthrie · Posted

      So I checked the turbo out today. Very minimum play at all just enough for the oil to take up when it's running. I did find an exhaust leak at the manifold. 1 stud all the way in the front is missing and the one all the way in the back is broken off. Front has visible signs of an exhaust leak. I'll fix that soon but that's not my problem still.  I also found that the nipple coming off the turbo had the hose capped off and a hose ran from the j-pipe by the bov going to the wastegate. I removed that hose and capped that nipple and put the turbo nipple hose back on the wastegate.  There was a ton of oil residue all through the charge side of the intercooler piping going to the throttle bodg. I'm thinking that's from the pcv. Doesn't seem to be coming from the turbo that was all clean on the pipes side.  Haven't had a chance to check fuel pressure yet, haven't had time been having to pull a lot of doubles at work. I did pick up some carb cleaner to clean the iacv but wanted to make sure I had a fresh gasket in case the old one rips when I pull it off.  I'm waiting on a MAF that was supposed to be here today but delayed to Monday. Have a double Monday and Friday and work all of next weekend so going to try to find some time in the middle of the week to try that out. Did about a 10m trip around the block today and towards the end the issues were coming back. Fingers crossed on this MAF but if not just going to throw a fuel pressure gauge in and see where I'm at.  Did notice today that I can definitely hear the injectors pulsing. Very audible clicking coming from them. Assuming that's normal? Should also mean CAS is functioning somewhat properly. After it warmed up when I started it the intermittent misfires came in again. Did start doing that before it was fully warmed up. 
    • klutched
      GOT SUM's RB34

      By klutched · Posted

      This morning I carefully reinstalled the manifold and started looking at a couple of things I need to do.  Heat wrap arrived sometime today so I popped into the shed with the missus dishwashing gloves and started wrapping the first half of the dump and the screamer/plumb back.  Once I do the second half I'll be able to final fit the turbo and exhaust up.  Also pulled the harness out today and started terminating it at the ECU end. A connector is done, just need to run the remaining wires that arent in the harness - 12v, gnd and couple I/O
    • Dose Pipe Sutututu
      Rear suspension upgrades

      By Dose Pipe Sutututu · Posted

      A31 is pretty much the same thing without HiAIDS I mean CAS, no improvement lol. Not to late to send it.
    • carnoobb
      Newbies

      By carnoobb · Posted

      Thanks for all the replies! I also wanted to ask if wheels that were fitted on Ford Falcons would fit the 350GTs as well? In the area I'm at there aren't that many options for secondhand wheels and new ones here are way out of my budget. From what I've seen, most of the wheels that are available that were fitted on Ford Falcons have an offset of +33 to +36, with a centre bore of 70.5mm whereas the stock 350GT's ones are 66mm, can't seem to find any hubcentric rings that fit that difference though. 
×
×
  • Create New...