Jump to content
SAU Community

Moving To Vic Next Year, Have A Few Questions


Recommended Posts

Hey folks, I am moving from the ACT to Melbourne next year and had a few questions that some of you can hopefully help out with.

Registration wise, if I am bringing a car from interstate to Vic do I have to go to an rta inspectation station or do I just go to the same place locals get theirs done at? Also related, do you guys have to get yearly inspections like NSW or do you have a similar system to the act where you get inspected when you first get the car then don't need an inspection any more unless you get defected or rego lapses?

Police wise, what are the police like with imports? In the act unless you a driving like a tool or your car clearly looks like its in breach of the law they will normally leave you alone. Is Melbourne similar or are the police quite strict?

Sau wise do you folk have weekly meets somewhere?

Also any other information you think might be useful would be awesome.

Thanks in advance for any answers regardless of them being helpful or not.

Edited by azathoth

In Victoria, we have VicRoads, which is our equivalent of your RTA. You only need an inspection (and therefore RWC) during first registration in our state, transfer of ownership, or to clear a major defect / notice of unroadworthy.

SAU Vic hold monthly meets open to members and non-members. We have member only events too. People on the forums do organise their own events too, though not so much during the colder months.

Police attention is random and depends largely upon where you live or travel through. Don't let someone tell you that if you drive sensibly, in a car that doesn't draw attention, then you will be cop free...because they are likely inexperienced and/or lucky. It is true that doing these two things will improve your chances of being left alone, but we are the defect state for a reason. People do get hassled in standard imports and defected/fined for something arbitrary; people also get ignored in loud shitboxes with chrome bits hanging off. It's luck of the draw sometimes, and the area / the kind of cop you come across both have a lot to do with it. If you're driving an import here, do so with the expectancy to have a run in at some point and you will have no nasty surprises :)

Thanks for the help folks.

I would bring fireworks if I could, the fun police took them away from us years ago. It made peoples dogs bark or something.

Decat + Ignition Cut Rev Limiter + Flame Show...

We do what we can to bring the fun back into this crazy world...

You don't need a RWC certificate unless you are transferring the car to someone else's name. You'll just need to make an appointment with Vicroads to get the car registered as per:

http://www.vicroads.vic.gov.au/Home/Registration/NewToVictoria/InterstateVehicleRegistration.htm

Thanks for that link. Does the appointment include an inspection or is it just sitting down at a desk and filling out forms and handing old plates in and getting new ones?

Sorry about the ignorance :3

ACT laws are the only ones I have ever known haha

if you can keep ACT rego, i'd suggest keeping ACT rego.

You can only keep rego for like 3 months though man, after that the police can fine you for not transferring the rego over if you live in Vic permanently

You can only keep rego for like 3 months though man, after that the police can fine you for not transferring the rego over if you live in Vic permanently

"i'm here for work, i transit between ACT and melbourne about fortnightly"

what? they going to send someone to follow you around? not worth that 700$ mang.

happened to a mate and he got fined, car was still regoed in QLD and he got fined and told to transfer rego over :S

=(

seems like he met a dick of a cop.

drove the snorer on nsw rego till it ran out, no issues, mate from shitney is still driving his civic on nsw rego, no issues.

In terms of the rego - Im not sure if ACT is same as NSW but VIC rego is much cheaper and less of a hassle. No annual RWC required and cost is just over $700. If ACT is anything like NSW, then it maybe worth transferring. The only thing is the VIC laws (and enforcement) in regards to defects/mods/EPA's and the like are much stricter, so its abit of a risk.

Vic police cant fine you or driving an ACT regoed car if you have a ACT licence and the address is valid. The line as mentioned above is that you've got 3 months, but in reality as long as you are able to receive mail to the address on the licence and rego they cannot fine you for not transferring (well they can fine you - and probably will, but you would be able to quite appeal the penalty in court on the grounds that you legally still live at ur ACT address if you are receiving mail)

Hope this helps

Thanks for that, to be honest it will be a hassle to keep it for longer than three months. We are renting at the moment and i don't really want my mail to still come here.
I think it is about 800-900 for a full year here and that included the CTPI. In vic do you pay rego yearly or can you do like here with 3/6/12 month increments? No yearly inspection is good, that is like here.

I am not too worried about the police, i am not the sort that does things to attract attention but just in case, i am already changing things to make it look more sedate, changing my BOV to a plum back, getting a return flow IC and going to paint it black so it's harder to notice and getting a box for my pod. My exhaust is actually a few DB quieter than legal here so i should be fine with that.

Are coilovers legal in vic as long as they are at or above legal height like here in the ACT?

Thanks for all the help again folks.

I'm looking forward to joining up with SAU Vic once i'm down.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...