Jump to content
SAU Community

Recommended Posts

DBA5000 2pc 323mm x 46mm x 24mm - extremely good condition. Came off my RX8 but will suit any 5x114.3 (direct R32/R33 GTR bolton or can be used with GKTech GTR dogleg caliper adapter kit on S/R chassis) setup though with appropriate caliper spacers. $600

post-93270-0-98913300-1381836029_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/433423-fs-dba5000-2-piece-rotors-324mm/
Share on other sites

Seems like a good price good luck with sale, but I wouldn't assume they would fit any car with same stud pattern. That would make buying discs way too easy!

They will fit same stud pattern... you will just need to ensure that you have caliper height to suit. GTR will be direct fit. S chassis and R chassis non GTR will need R33 calipers and the GKTech Dogleg caliper adapters which will space the calipers to suit 324mm diameter rotors.

Located in Adelaide. Can post (prolly be 50 bucks due to weight?)

could uou post the part number so people are be able to check to see if they will fit.

I, I would be seriously suprised if nissan and mazda used the same size discs. post-107339-0-87823200-1381885199_thumb.jpg but I am ready to be suprised!

Edited by superben

Calm your farm lads. As stated, dogleg adapters from GKTech ($99) or make your own would be required to use R33 GTST or 32/33 GTR calipers on S or R chassis cars.

And skinnier isnt an issue considering they are 2 piece... -_-

Rather than chiming in with your 2 cents, maybe actually have some knowledge first off hey lads...

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...