Jump to content
SAU Community

Recommended Posts

After recently breaking my motor I have decided to part it out.

Here are some parts to start with,

Hks T51R KAI BB turbo setup - $6000 Ono.

Includes:

HKS GT II 60mm wastegate with stainless screamer

HKS turbo manifold

Stainless Dump pipe heat wrapped

Stainless braided oil and water lines with AN fittings

Custom stainless 4" intake with k&n pods

Haltech Platinum Pro ECU - $1500

Teflon braided fuel system - $1000

SARD surge take with 2x 340lph internal fuel pumps

1x Walbro lift pump for fuel tank

2x -6 Teflon stainless braided lines to dual entry fuel rail

Tomei dual entry fuel rail with AN fittings

And relays

Splitfire coils 6mths old - $450

Zeitronix O2 wide band AFR sensor kit - $200

HKS type R front mount intercooler - $300

Ati balancer - $400

PAR dog engagement 5 speed gearbox with larger Hollinger input shaft - $5000

$5500 with triple plate Orgura clutch

Profec B Spec II boost controller -$250

Front Nashin 6 piston, 355mm front brakes forged calipers with braided lines - $1600

Rear Brembo R33 GTR calipers with SRT pads - $250

KAAZ front and rear LSD diff's - $900

Tomei 320km cluster - $200

Mines 3 center cluster upgrade - $150

AEM EGT exhaust temp gauge - $70

AEM oil pressure gauge - $70

4x rear spare drive shafts complete - $150 per/pair

Alloy racing radiator with twin Davies Craig thermos - $250

Nismo water header tank with lines - $50

Nismo strut tower brace - $100

HPI engine damper original - $100

Earls oil cooler with oil relocator and braided lines - $100

18x10" x 4 rim's with worn rubber

Body parts and interior also available

JUN 264 9.7mm lift IN/EX cams - $300

2x Gates Racing adjustable cam gears - $200

Any questions PM or SMS on 0414918758

post-1009-13831303617286_thumb.jpg

post-1009-13831303734983_thumb.jpg

post-1009-13831311393135_thumb.jpg

post-1009-13831303904317_thumb.jpg

post-1009-13831304023056_thumb.jpg

post-1009-13831304141985_thumb.jpg

post-1009-13831304738404_thumb.jpg

post-1009-13831311073823_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/434303-parting-out-my-602kw-r32-gtr/
Share on other sites

Just letting everyone know,all the parts were functioning just the way they should of, this selling of parts wasn't planned. The engine broke due to over powering my rods which didn't support 600kw I found out the hard way.

All bearings in the engine are ok except the small end on cyl 6

  • Like 1

Thanks for the crazy response guys.

I've had so many messages and sms's I haven't kept up but tomorrow I will be checking the times of each message and the parts you are requesting and giving the opportunity to the earliest received message to be fair.

I will also be taking pics of parts you have requested as well and replying via SMS or pm directly with the buyers.

Thanks again guys, I want to be fair to everyone so don't stress.

Im sad your parting this out. Just rebuild the he motor. I want more youtube clips lol.

Edited by Joshbigt62r
  • Like 1

Sorry to hear I miss fortune man ... Just out of curiosity what make were the rods that broke , build a big hp rb26/30 and the moment and just wondering which rods you are referring to , pm me if you don't want to post that one thus thread ? Cheers mick

Sorry to hear I miss fortune man ... Just out of curiosity what make were the rods that broke , build a big hp rb26/30 and the moment and just wondering which rods you are referring to , pm me if you don't want to post that one thus thread ? Cheers mick

They were Trust h-beam rods that were over 16yrs old

Im sad your parting this out. Just rebuild the he motor. I want more youtube clips lol.

Thanks Josh, maybe ill do a crazy 34 in the future but not right now, family priorities... I will try to continue uploading crazy footage on YouTube with friend's RB's and builds

Currently everything on the list except the following are sold

And still available

- HKS T51 setup still available

- Dogbox with triple plate clutch

- Gates adjustable cam gears x2

- 1 pair of drive shafts

- Splitfire coils

- 5Zigen steering wheel and boss

- Blitz torque controller

- some body parts and interior parts still available, just ask

Prices are listed above and are negotiable.

Thanks to everyone that has bought and paid so quickly, the parts are already started to ship

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...