Jump to content
SAU Community

Fs Brisbane Vipec Ecu Rb26 Gtr R32/33 Skyline Plug-In

James_03
 Share

Recommended Posts

James_03 Mentor

James_03

Posted
Posted (edited)

Hey Guys,

Got a like new (Removed from box only) Vipec plugin ECU for sale to suit rb26 r32 and r33. Shouldn't need any introduction, you know what it is, and what it's capable of.

Chasing $1400, will post Aus wide.

post-13028-0-30938400-1384677503_thumb.jpg

post-13028-0-94727500-1384677512_thumb.jpg

post-13028-0-65934300-1384677521_thumb.jpg

post-13028-0-49816800-1384677841_thumb.jpg

post-13028-0-58747000-1384677850_thumb.jpg

The Vipec unit is a fully mappable computer, giving you control over all engine parameters. Plus, it has real antilag and launch control (unlike the much more common PowerFc), switchable maps, etc etc etc

Vi-PEC has produced replacement ECU boards and adaptors for the original ECU on many different makes and models, with new PlugIns being added constantly (see current range below).

  • The original motherboard and connector are removed from the ECU case and the Vi-PEC motherboard and connector clips or screws into the case. The original harness plugs in and the job is done, no wiring and all original sensors are used. External view of ECU case and connector is unchanged from its stock appearance.
  • Most PlugIn ECUs have an internal 2.5 bar map sensor. An optional 7 bar map sensor is available. External map sensors are also supported.
  • Considerable gains in power across the complete RPM range can be achieved with these boards. Both road car and Group N rally car versions are available.
  • Allows full control over fuel, ignition timing, boost pressure and all other engine functions. All boards have QuickTune software and optional Anti-lag.
  • All boards are supplied with base programs available. Some final tuning will be required.
Edited by James_03

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By GTSBoy · Posted

      Yeah it does.
    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      Hi everyone, I've been wrestling with this for a while now and have been trying to find out the cause. For context, the turbos used are Garrett 2860 -5s, the BOV is a BNR32 HKS SSQV IV kit, the car is currently tuned to ~470 whp on 17.5 psi. The car drives normally, pulls well when it doesn't happen, and I can replicate it fairly easily. It does not sound like turbo shuffle or flutter. The engine has only a thousand or so miles and has had this behavior since it was completed. After my engine was built for my R32 GTR, I noticed that the car now sometimes makes an air discharge sound on what appears to be positive boost pressure that sounds really similar to a BOV. I had thought that it was a BOV issue but even when replacing it with a brand new unit, the sound persisted. It seems like it's coming from the passenger side but I may be mistaken. The closest scenario I could find was this post here https://www.gtr.co.uk/threads/maybe-a-boost-leak-opinions.147955/https://www.gtr.co.uk/threads/maybe-a-boost-leak-opinions.147955/ started by @yakshii and it sounds very similar. As in, at partial throttle once I reach positive boost I begin to hear the same psh psh psh psh psh sound like air is leaking somewhere when I keep the throttle in the same position. It most commonly happens in 4th gear at around 3-3.5k RPM and 5th gear around 2.5-3k RPM, which seems to coincide with normal positive boost thresholds. It might be similar to what @Austrian GTR mentioned about his own HKS SSQV. Notable difference would be that when he applies more throttle when it happens, it stops. In my scenario if I apply more throttle during this repeated psh psh psh sound, the cadence of the sound gets faster and louder rather than stopping. If I lift off slightly and apply throttle again, it will normally stop and pull without issue. I've checked all rubber couplers to ensure that they are tight, but have not gotten the opportunity to properly do a pressurized boost leak test. If anyone has had similar experiences or thoughts on what might be the cause, I'd be very keen to hear them. I also have a video of it happening from inside the cabin, if that would make it easier to understand: https://youtu.be/2zqZXcx8jbA
    • Dose Pipe Sutututu
      Living With An R33 Gtst

      By Dose Pipe Sutututu · Posted

      wow that escalated quick.
    • tridentt150v
      Valuation of r33 gtst 1998 40th anniversary

      By tridentt150v · Posted

      I'd want at least $40K for mine, but thats easy to say cos I'm not selling anyway.
    • TurboTapin
      Leaking Rear Subframe Bushing?

      By TurboTapin · Posted

      That's incorrect. We have 4 seasons, consisting of pre winter, winter, post winter and a small glimpse of hope! 
×
×
  • Create New...