Jump to content
SAU Community

Recommended Posts

So the suspension is raised

Exhaust is quiet (although small leak)

Child restraints in

Headlights checked and replaced bulbs

Car seat covers on (pink and black lol)

Only thing I totally forgot was the workshop manual :(

Inspection is tomorrow lunch time so no time to sort that out with work starting at 9am

I guess I'll see what they find for me and just go from there. Only things I can think of is the 235 tires on 18x9.5 +22 rims but if they fail that then that's an easy fix.

Xoxo Gossip Girl

So I didn't get bent over too bad.

Didn't pass but also didn't fail majorly.

Things to fix:

-Suspension has no travel. (because I wound the coilovers all the way up)

-Aftermarket boost solenoid.

-Front left parker light

So does anyone have a stock boost solenoid I could borrow for the inspection?

Also would that cause any issues with my tune if I was to drive it off boost?

So does anyone have a stock boost solenoid I could borrow for the inspection?

Also would that cause any issues with my tune if I was to drive it off boost?

I've got a stock boost solenoid. Don't think there's any differences between s1 and s2.

No idea on the tune issue

Awesome :)

Might have to grab that one off you.

Depending on if it effects the tune or not

its a "boost" solenoid if its not on boost who cares. Just run I hose straight from if bung to waste gate running less boost is not an issue.

Just remove the aftermarket solenoid and controller, leave the wiring and run the hose from the intercooler pipe nipple to the actuator, you will just be running off actuator pressure so boost might come on a bit sluggish but it wont go over what it would have been set up to run on the ebc.

Leave everything else set up in there and just block the other vac hoses up for the re-inspection

Edited by Mitcho_7

Awesome thanks guys.

Pattey are the shocks high enough to pass an inspection?

Also are they not leaking?

I'm thinking I may as well put them in now for the re-inspection so I don't have to adjust coilovers and then remove them at a later date.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...