Jump to content
SAU Community

Speed Off The Streets @ Wakefield 22/12/2013


Recommended Posts

Hey guys,

A couple of of mates have finally decided to go to a track day.

We will be going on Sunday 22/12/2013.

This will be a day open to the public so anyone is able to come and join.

I'm hoping to get enough cars to fill up a group.

I'll be there trying to get as many photos of everyone's cars as possible :D

More info here - http://www.wakefieldpark.com.au/event-detail?event=679

Facebook event here - https://www.facebook.com/events/228431687317083/

Feel free to join in / invite anyone who is interested!

Prices -
o Drive your own street $150.00 per weekend day
o Australian Autosport Alliance licence $50.00 (annually)
This is an event where you just rock up pay and race!

Cheers

you'll get away without one.. just will be laggy, longer duration = can add more timing

but with your stock timing map it will run just fine...

did you go 272 Kelford?

and now the car goes "brap brap brap brap brap" on idle? hahaha

I bet the GT-R boys are jelly, long duration cams and no lag

Been told not to thrash the car until tuned? lol..

Went Power Division GSC S2 274's.

And yes, "brap, brap, brap, brap bopbopbop, brap" LOL.

Not good combined with the tomei TI. Way too loud for daily driving.

  • 3 weeks later...

just find the power.... it must be there somewhere :)

or stay under 6k! :)

could be coil packs, fuarking ling long yellow jacket shit.. I've replaced 2 out of 6 of them already

might just bite the bullet and buy a brand new set of splitfires (never have let me down with my previous cars)

I bought my current shit box with the homo yellow jackets lol



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...