Garage Cleanup - Rims, Engines, Jacks, Heads, Covers, Etcs

[SilverECR33]

Selling my Original Speedy Spyders (rare not made anymore)

18 x 8.5" Rims with dish and offset to suit Skylines, Silvias and Fords
A small amount of gutter rash, small flat spot inside left front rim, however you cant notice it even at speed, and some small chips on the rim (fixable)(see pic) which was made by the shop who installed my new tyres..

Ive owned the rims for 6-7 years, and they have been really good. cost me $1,500 back then. They are currently on the car and to prove the condition they

will be on the car this weekend at the track.

These are a pretty decent mid range rim, not the lightest but they are strong.

Will remove once buyer has made downpayment

Asking: $400 ono

Price is for rims only, no tyres. however I can add a set of Potenza RE 050A street tyres 75% tread for an extra 250$

=====================================================================================

600 x 300 x 76 KLS Japan Alloy Intercooler

Type: Bar and Plate

Condition: used this for about 5 years, still in very good condition

item is clean and sealed ready to go.

will suit almost any vehicle

Asking: $100

====================================================================

RB30 S2 Engine

I have a RB30 S2 Engine here, including head

everything good on this motor except for the crank.

$300 for the lot

==================================================================
RB25 Head ready for 30/25 conversion
Fully prepped 25 head
Crack tested head.
Boss welded and tapped for side VCT Feed
VCT Feed on port face welded and head decked
Full valve job, all new Vavle stem seals
all relevant welsh plugs welded, and head cleaned and checked.
comes with stock cams and lifters
$2k + worth of work . receipts available.
asking $750 ono

[/u

RL]

=================================================================

R33 Skyline Cam and Valley Covers (RB25)

Asking: $150

As you can see, full set of RB25 Covers Wrinkle painted, and valley cover meshed. (same head as above for sale)

==================================================================
Jim Berry Single plate 6 puck carbotic clutch with balanced billet flywheel
700hp rated
asking $200

==================================================================
K&N Pod (cost $160)
Still really good condition only used for about 5k kms.

Asking: $30

==================================================================
2.5 Tonne Workshop Jack
6 years old, really reliable strong, cost $260 new
selling for $120
nothing wrong with it, just need a slimline one.

==================================================================
Stock R33 GTST Swaybars

Front and Rear good condition with rubbers 50 bucks for both.

==================================================================
stock R33 GTST Cams

I dunno?... $40 no scoring, ready to go.

[url=http://imageshack.us/photo/my-images/145/rb25detcams.jpg/]

All reasonable offers considered.

Call or SMS 0432279166

[thelewis]

Location mate?

[SilverECR33]

location Brisbane

thanks

[SilverECR33]

Guys, I made a typo the clutch flywheel is not billet, its just a balanced one in good condition.

thanks

**INtercooler SOLD**

[Billionaire_Project]

Hey mate what condition is the clutch?

[Caelen]

Not sure if it's a bit late, but you still have ignitor cover?

[SilverECR33]

***CLUTCH SOLD***

[badz]

Can you be bothered posting those cams to 3020