Jump to content
SAU Community

Recommended Posts

I have a device that calls my mobile when my car alarm goes off. Then I can activate a relay by pushing 7 on my mobile. The relay can switch anything you want like fuel pump etc... You can also hear what is going on in the car.

I think it cost me about $60, i have not got it in yet but a mate of mine has the same thing and it work fine.

Link to comment
https://www.sau.com.au/forums/topic/43648-would-this-work/#findComment-891255
Share on other sites

Im not sure if its possible or not,

But even if it is. Unless the mobile is on a constant call. You would only be able to trace it to the the current cell the mobile is in (in other words the closest tower)

So you might find yourself narrowing it down to a suburb, but a suburb is a big place. And unless the theifs are complete morons it will be in a garage and you won't be able to just cruise around and have a look for it.

Link to comment
https://www.sau.com.au/forums/topic/43648-would-this-work/#findComment-891287
Share on other sites

its normally upwards of a grand to trace a mobile, thats why people often prefear to buy a new fone other than tracing it, therefore if u goin to spend this sort of money wouldnt it be more feasible to have a satnav system for this same reason?

Michael

Link to comment
https://www.sau.com.au/forums/topic/43648-would-this-work/#findComment-891299
Share on other sites

I have a device that calls my mobile when my car alarm goes off. Then I can activate a relay by pushing 7 on my mobile. The relay can switch anything you want like fuel pump etc... You can also hear what is going on in the car.

I think it cost me about $60, i have not got it in yet but a mate of mine has the same thing and it work fine.

That sounds very interesting....can you post more details??

Link to comment
https://www.sau.com.au/forums/topic/43648-would-this-work/#findComment-891300
Share on other sites

Im not sure if its possible or not,

But even if it is. Unless the mobile is on a constant call. You would only be able to trace it to the the current cell the mobile is in (in other words the closest tower)

So you might find yourself narrowing it down to a suburb, but a suburb is a big place. And unless the theifs are complete morons it will be in a garage and you won't be able to just cruise around and have a look for it.

Why do you say it would have to be on a constant call?

Link to comment
https://www.sau.com.au/forums/topic/43648-would-this-work/#findComment-891365
Share on other sites

I have a device that calls my mobile when my car alarm goes off. Then I can activate a relay by pushing 7 on my mobile. The relay can switch anything you want like fuel pump etc... You can also hear what is going on in the car.

I think it cost me about $60, i have not got it in yet but a mate of mine has the same thing and it work fine.

This just stood up and caught my attention... details please :D

Link to comment
https://www.sau.com.au/forums/topic/43648-would-this-work/#findComment-891543
Share on other sites

http://www.ja-gps.com.au/carminder_index.html

Want to keep track of an outdoor object for less than $900? Here's the simple answer, built right here in Australia. It is easy to install, and reliable.

When installed with a 12v power source, it can send an SMS message to ANY SMS capable mobile phone, giving latitude and longitude, and street directory reference (all capital cities). This unit can be installed anywhere- a bike, car, earthmoving machinery, boat, and trailer. The system can be wired to a car or boat alarm, so that it automatically sends the message when the alarm is activated. The applications are limited only by your imagination, and the range of the GSM mobile phone network.

The price of $891 gives you a plain black box, which includes the GPS and GSM aerials, installed mobile phone with pre-set number and SIM card, and power and aerial cabling. You can install it yourself, or employ an auto-electrician.

How do you operate it?

Just dial the pre-set number of your Carminder using ANY SMS capable mobile phone. Within 30 seconds, Carminder sends you an SMS message, detailing the position, direction and speed of the vehicle in which it is installed. This position can be located on a directory, or a digital map. The SMS service from carminder is pin-code protected, so you have complete control over how and where Carminder messages are sent.

What is the cost?

The only cost is the six monthly fee (approximately $30) to re-charge the SIM card on the Carminder phone, and the cost of any calls you make to the Carminder.

Link to comment
https://www.sau.com.au/forums/topic/43648-would-this-work/#findComment-891574
Share on other sites

http://www.ja-gps.com.au/carminder_index.html

Want to keep track of an outdoor object for less than $900? Here's the simple answer, built right here in Australia. It is easy to install, and reliable.  

When installed with a 12v power source, it can send an SMS message to ANY SMS capable mobile phone, giving latitude and longitude, and street directory reference (all capital cities). This unit can be installed anywhere- a bike, car, earthmoving machinery, boat, and trailer. The system can be wired to a car or boat alarm, so that it automatically sends the message when the alarm is activated. The applications are limited only by your imagination, and the range of the GSM mobile phone network.

The price of $891 gives you a plain black box, which includes the GPS and GSM aerials, installed mobile phone with pre-set number and SIM card, and power and aerial cabling. You can install it yourself, or employ an auto-electrician.

 

How do you operate it?

Just dial the pre-set number of your Carminder using ANY SMS capable mobile phone. Within 30 seconds, Carminder sends you an SMS message, detailing the position, direction and speed of the vehicle in which it is installed. This position can be located on a directory, or a digital map. The SMS service from carminder is pin-code protected, so you have complete control over how and where Carminder messages are sent.

What is the cost?

The only cost is the six monthly fee (approximately $30) to re-charge the SIM card on the Carminder phone, and the cost of any calls you make to the Carminder.

Now that ain't talkin out of ya bumhole!!! Ace unit...I want one of these!!

Link to comment
https://www.sau.com.au/forums/topic/43648-would-this-work/#findComment-891578
Share on other sites

To clarify a point. You don't need to be on a call all the time.

When a phone is turned on, it looks for a network cell. It then send the ID of the SIM card with the ID of the phone, which in turn updates the network/phone database.

So when you call a number, it looks for that phones cell, then sends a "ring ring" to the phone, which is linked to the sim card.

What is also sent to the phone when it is turned on is what other cells are around it.

The phone keeps monitoring those other cell stations. When you move around and it gets a better signal from another cell, it would then use the better strength cell staiton as it's "base"

This is an ongoing process and that's what those stupid sounds that you get on your radio station just before the phone rings or it changes base stations (Geeks: this is basically your phone doing a ping/network scan)

SOOOOO what does this mean? At any given point in time there are about 3/4 stations that know where and at what strength your phones is.

Simple trig would allow you to at least pin point the phone to "about" 25 meters.

Do this at say 4am on a tuesday and you could probably find your car.

If phone companies would do this another whole kettle of fish.

Oh, which brings up another point. The telco providers have had the technology (cuz it is built into the GSM networks) to trace and block IMEI numbers of mobile phones.

It isn't worth it too them though as one person signs up for 12 months on a contract, loses it, either pays out contrct or gets new phone, meanwhile stolen phone is also contected. So they get two people making calls on the one contract. Schemeing buggers.

Link to comment
https://www.sau.com.au/forums/topic/43648-would-this-work/#findComment-891749
Share on other sites

Oh, which brings up another point. The telco providers have had the technology (cuz it is built into the GSM networks) to trace and block IMEI numbers of mobile phones.

It isn't worth it too them though as one person signs up for 12 months on a contract, loses it, either pays out contrct or gets new phone, meanwhile stolen phone is also contected. So they get two people making calls on the one contract. Schemeing buggers.

I was under the impression that IMEI blocking is now enabled on all networks and is already in use

Link to comment
https://www.sau.com.au/forums/topic/43648-would-this-work/#findComment-891803
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...