Jump to content
SAU Community

Track Control Link Arm

kyle345
 Share

Recommended Posts

kyle345 Enthusiast

kyle345

Posted
Posted

Hey guys just rebuilding my R34 after it had a crash and ive came across a bent part not sure whats its actually called looks like a track control link arm.

post-107270-13878601019806_thumb.jpg

Was very difficult to put in, had to use a prybar to stretch it to line up to the bolt holes. Thats the drivers side the reason im not sure if its meant to bent like that is because it looks like a manufactured bend, normally when parts bend they flake paint or crease, this has none of that.

The passengers side is dead straight though

post-107270-13878602205651_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/436715-track-control-link-arm/
Share on other sites
GTSBoy Grand Master

GTSBoy

Posted
Posted

That bend doesn't look like it happened in a crash. By the same token, I've never seen a factory Nissan caster rod witha big curve in it like that.

Teh real question is, what is the length of that arm from front bolt centreline to the back bolt? If it's the same or very close to the length of the straight arm on the other side of the car, then it is a factory pre-bent arm to clear something or other on some car or other. If it is much shorter than the straight arm, then it has taken a big hit.

Either way, if the you have to pry it really hard to get it to fit up, then you are going to be pulling that wheel a looooong way forward in the wheel well, putting a lot of caster on that side, and a lot of strain into the upper and lower inner bushes on the suspension arms. Not good. Get it to a wheel alignment/chassis specialist (not a tyre shop!!!) and get it checked out. If there is residual lack-of-straightness in the front chassis then you will never get a good wheel alignment, tyre life or handling performance out of the car. Best to find out now I reckon. If you're in SA then I can recommend Stable Wheel Alignment in Pooraka. They are very good (they do this sort of work to get cars fixed up for crash repairers who cannot) although the main guy there is a pain in the arse to interact with sometimes (all the time!).

cheers

V28VX37 Veteran

V28VX37

Posted
Posted

Hey guys just rebuilding my R34 after it had a crash and ive came across a bent part not sure whats its actually called looks like a track control link arm.

...

Was very difficult to put in, had to use a prybar to stretch it to line up to the bolt holes. Thats the drivers side the reason im not sure if its meant to bent like that is because it looks like a manufactured bend, normally when parts bend they flake paint or crease, this has none of that.

The passengers side is dead straight though

...

That bend doesn't look like it happened in a crash. By the same token, I've never seen a factory Nissan caster rod witha big curve in it like that.

...

Nope - that's what the factory R34 caster/radius rod looks like on my GTT (bottom one):

9408680138_f78c3ebb37.jpg

My factory ones are bent similarly on both sides too (mirrored).

I have no idea why yours would be different on one side compared to the other?

GTSBoy Grand Master

GTSBoy

Posted
Posted

Hmm thats weird... Mines only a GT but i doubt that would make the difference.

You shouldnt need to use a pry bar to get them in? Should they just line up to the bolt holes straight up?

You usually need to apply some force to fit them. I've never had to use a pry bar even when I've had my adjustables wound a bit shorter, but YMMV. As I said, get the car checked by a specialist if you're worried, especially given it's just back from the crashies.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dbm7
      R34 Skyline climate control unit transistor

      By dbm7 · Posted

      Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      First time we have seen lights 
    • Wazmond
      WGNC34 - floor mats

      By Wazmond · Posted

      I think Fitmit had some, have a look on there (theyre Australian as well)
    • soviet_merlin
      Howdy Y'all

      By soviet_merlin · Posted

      Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...