Jump to content
SAU Community

Recommended Posts

What's up guys !

Can someone plz plz give me a hand with this hey,

this is serious driving me insane !! :cheers:

Couple of month ago I bought a 1992 Sliver GTR R32 from

Melbourne for a good price, I only paid $28,000 for it , after the

car passed the inspection from Melbourne, I paid $1,450 to

get it over in Brisbane, then another $900 to register it..

And a couple of weeks ago white smoke starts to come out

form the exhaust, well... I didn't really give a thing in the start,

but it keep on happaning so I took it to the work shop.

I thought it's probably my turbo is getting old,

time to chuck a new one on it.

Unfortunally the mechanic walks out and told me the turbo is

quite fine, so there could be a problem with the engine. so then

we did a Engine Comperssure test, the first 3 cylinders was all good,

but drop the compressure on the last 3 cylinders ...OMG @#$%@& :):);)

and the gearbox oil is leaking .... and all this problems..

This is been bothering me to the max , I have already spend over 30k on the car,

and it just ........

And i thought it passed the inspection in Melbourne, ..

and the guy I bought the car from,

his phone is switched off...@#$@%%

next time I better not buy a car without seeing it hey ..

So.. PLZ.. somebody give me some ideas

where should I go to do a Engine Rebuilt,

I live in Brissy , and also where should I buy clutches,

cos the clutch on the car is gettign sliper and sliper.. @#@$% :D

=Skylineinsane=

Link to comment
https://www.sau.com.au/forums/topic/43691-92-gtr-r32-engine-blowing-up-help/
Share on other sites

depending on how long ago the car passed roadworthy you may be able to ring the workshop that inspected the car and ask them, how exactly they passed a car with oil leaks etc...worth a try as many dodgy workshops are being repremanded by the government transport department. If not have a ring around brissy there are plenty of workshops who will do the job of a rebuild. Just make sure you know what exactly is wrong and what needs and doesnt need fixing, so you dont get ripped off! Good luck

Matt-

Dude, if you want parts, pm me. I will ship them from overseas. Maybe consider a stroker kit, like HKS, if you've got the cash lying around. Forget about the stock block. Get an N1 block from Nismo, they're 3k a pop.

HKS stroker kits come with pistons, con rods and crank. Put it all in and you should have a decent engine. Head work is the next thing you would look at, get it port and polished to maximise your bottom end. And don't forget about your sump baffle while you're at it.

If you've got about 40-45k lying around, I can get you an 800hp Tomei engine, or a JUN engine built to your specifications.

The warranties arent what they seem unfortunately,

The cover certain parts to a certain value.

IE; The engine to 2000, the clutch to 500 etc etc

so warranties from dealerships are pretty much useless.

Goto Gavin woods or someone with expierence in internal work on RB26DETT

Almost the exact same thing happended to me beginning of this year. car was a little cheaper though. It is currently at Autotech (Gavin Woods) with motor out at the moment.

I will have spent 30k by the end, but it has to fresh turbos already.

So if all goes well I haven't done that badly.

Previous owner wound up boost after it was rebuilt last year. His mechanic did the check over of the car for me....

Im the one thats silly enough to believe older ppl don't rip ppl off.... blah blah blah

This was in a ute not the GTR. luckily

Im hoping everything is sweet once the motor is back in place... I dont plan on modding the car, just enjoying it.

One good thing about a GTR as opposed to a commodore, your not forever modding it trying to make it go like a GTR

thats teach everyone a lesson,you pay for what you get,good GTR always hold the value very well,only a doge GTR or poor condition GTR sell cheap, you should spend more money to get right GTR,not try to spend less and get shit car,

i sold my GTR32 for 36k few months ago,the new owner very happy for the car and never have any problem at all,

i think you should try to get some used R33GTR engine,it wil cost you 5k to buy and you still can sell you old motor for 2k,its work out cheaper,

good luck

depending on how long ago the car passed roadworthy you may be able to ring the workshop that inspected the car and ask them, how exactly they passed a car with oil leaks etc...worth a try as many dodgy workshops are being repremanded by the government transport department. If not have a ring around brissy there are plenty of workshops who will do the job of a rebuild. Just make sure you know what exactly is wrong and what needs and doesnt need fixing, so you dont get ripped off! Good luck

Matt-

hey matt with the oil leak on the road worthy

the car can have a oil seep's meaning that the cross member can be fully covered in oil & it can still pass,the only problem is that it must drip more than 3 time

in 60 sec to fail all that most small shops will do is just wipe or wash the cross

member off & pass it. witch is BULL S**T & a real :kick: 4 the poor prick that

buys the car.

this is the only time it is worth taking a car into a dealer ship because the dealer's have a lot more to lose, most car yards have a mechanical shop they send all there cars to meaning that the mechanical shop will let small things go through

dealer ship's are a lot more strict with their road worthy's

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...