Jump to content
SAU Community

Recommended Posts

So you had the Retrofit done?

The reason:

In 1989, the Australian Government restricted the use of refrigerant R12 under the Ozone Protection Act, thus requiring replacement of the use of R12 with the environmentally friendly R134a gas.

R12 to R134a conversion (retro-fitting) for older vehicles conditioned to use the R12 gas, as R12 gas is no longer available to consumers.

Think there is more to it than just changing from R12 to R134a.

Also any shop that is still doing R12 would be putting their livelihood at risk :(

Edit: Had mine retrofitted about 16months back. Going strong and cold

Edited by Sinista32
Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158423
Share on other sites

Yes it's different stuff though it's called hychill and will more than likely replace 134a , I had the oil changed system evacuated and r134a added lasted one day before over pressure , guys are traders on sau and very good to deal with but my research says maybe too much gas was added or something as 32's are designed for r12 which runs at less head pressure, who did yours? Do you know how much oil and gas was added?

Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158586
Share on other sites

Hychill will not replace R134a. The only reason it became popular was due to a legislative loophole, which is now being closed.

Meaning, misinformed and unlicensed business/traders were technically able to purchase the gas and consequently service peoples cars.

As an ARC licensed mechanic, my advice would be to take it to a licenced business who knows what they are doing.

Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158646
Share on other sites

Yes absolutely could be I just worry cause the amount if guesswork with volumes and pressures and if there is a better gas that works at specs posted on the compressor why not look into it? It was actually working very well till the relief valve opened but this other gas is much more efficient and runs less pressure it's used in many older fords and Holden's that are just not suited to 134a anyway I will look into costs as it can be bought locally and see if someone will do it for me otherwise I could but a manifold and DIY

Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158647
Share on other sites

With the 134 conversion I have spoken to a few shops, some say need new filter and tx valve oil etc some say different hi low switch some say nothing just evacuate and recharge its a bit confusing , at least hychill is seemingly compatable with all systems from what I read

Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158653
Share on other sites

And I wrote that before your post came up on my phone in case your confused lol I just don't want to go through another compressor, parts cannot be purchased for them so it's second hand or big bucks for a new one if they can still be bought so I was just trying to reduce the workload on the poor old thing but if I can't then I can't

Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158659
Share on other sites

Yeah that is fair enough, but the thing with air con is that you can't half do it. In for a penny, in for a pound. And you really have to know what you are doing. If you think that's bad, spare a thought for some cool room systems that use 404 gas. Its $300+ per kg.

Edited by White GTS-T
Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158668
Share on other sites

Yeah that is fair enough, but the thing with air con is that you can't half do it. In for a penny, in for a pound. And you really have to know what you are doing. If you think that's bad, spare a thought for some cool room systems that use 404 gas. Its $300+ per kg.

I did a compressor change on an underground chiller that took over a hundred kilos of r12, most big chillers still use it cos its the shit.

Also fridge gas got a new environmental tax or some such in the last year or so. That's why "$100 regassess" aren't advertised as much anymore, it costs way more in refridgerant.

Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158759
Share on other sites

The chiller I did was a baby my boss said, at that was only one side of it, it ran parallel compressor ccts. It was cooling water for a swampy that was lucky if it dropped 2deg off ambient air temp, mines have to much money lol. Bit off topic though.

to op change your dryer/receiver and vac out properly and pressure test, then regass while checking your pressures and temps and there shouldn't be any dramas.

Edited by R33shaun
Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7158768
Share on other sites

  • 2 weeks later...

Well I ended up doing it myself after system was professionally evacuated previously . I got a rig , oil with uv and hychill, I know it is probably not legal and frowned upon but what's the difference with other things we do ourselves ? Anyway it's nice and cool pretty easy to do hopefully it lasts if not the can only cost $21 so worth the risk if it doesn't and I will hard wire fan to come on with a/c button too just to help things along.

Scott

Link to comment
https://www.sau.com.au/forums/topic/437021-r12a-gas/#findComment-7169654
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Got the passenger door on plus the master cylinder and booster. Loaded up to take it home. At home, the colour changes a lot in the light.
    • Nothing cheap, but I have seen the AC Hydraulic DK13HLQ which is pretty close to what you're asking for. The problem is the hydraulic cylinder mandates that the back of the jack be a certain height and Skylines have fairly deep inset floor jack points. A more certain and cheap option is to get some nominal 2x10 inch lumber boards and have one board be 1.5 feet, the other board 3 feet. Glue it all together with lots of clamps to maintain pressure. Make two of these. The ramp suggested above is a good idea, it takes quite a bit of clutch slip to get over each of the boards. I only need the first ~1.5 inches for my low profile jack on a standard ride height car but a lowered car you want to go up to the full ~3-3.5 inches. Paint it or store indoors if you want it to last.
    • Ok. And Nistune? I read (here too) mainly on Stagea threads that it can by "turn off" with Nistune. But they say they still had the sensor plug in. Next week iam going to the Nistune(and other ECUs) tuner so i can finally make it work. I drove the car home and apart from the cut it drove great. No misfire no smoke no hesitation or rough start...so hoping it is this sensor that is missing  
    • I just stack 2 pieces of 200x50 timber on top of each other. Total length about 900mm, with the top one being a little shorter and both having a 45° angle cut on them to make the front edge a bit of a ramp. Put these in front of each front wheel, drive up on them, throw the trolley jack under. Takes 1 minute. Scissor jacks can eat a bowl of dicks. I never use on under my car unless desperate.
    • Well, yeah. But I just expect everything other than my car to feel like a bucket of shit anyway. I still miss my Alfa 116 so much though. You could run over a 20c piece and tell whether it was heads or tails.
×
×
  • Create New...