Jump to content
SAU Community

Recommended Posts

What does it matter? As if you're going to take what someone says on here is a "safe" boost level, adjust the boost up to that level and just drive away, believing that the injectors are not maxxed out and the mixtures are fine.

For a start, you do not fit any sort of "upgrade" turbo to an R33 RB25 without looking into the engine managemane problem. The problem? That the original engine management sucks balls. You simply must install some sort of aftermarket computer in order to be able to fix that. Otherwise you install your 2510 and then you make sure you do not boost it (assuming it has a decently high wastegate actuator installed on it). And you drive it around with a thumbtack in your right sock to remind you not to boost it.

If you wind the boost up to anything over about 10 psi (plus or minus the various uncertainty factors) the car will start misbehaving and go into R&R. And the injectors will be maxxed out because the mixture settings in the stock fuel tables are well over 100% duty cycle up in R&R territory. This won't matter, because it will drive like a piece of shit and you'll be on here asking why it's farting and spitting and blowing black smoke.

i do have an aftermarket ecu, i have a tuned greddy e- manage i am aware that the stock r33 ECU are very sensitive, if it only makes 10 to 15kw thats still better than the stock turbo and i wont have to worry about bout my stock turbo shitting itself, i did get that turbo for a cheap price.

i do have an aftermarket ecu, i have a tuned greddy e- manage i am aware that the stock r33 ECU are very sensitive, if it only makes 10 to 15kw thats still better than the stock turbo and i wont have to worry about bout my stock turbo shitting itself, i did get that turbo for a cheap price.

Just sell it for a profit and buy something that better matches the rb25 then. http://www.skylinesaustralia.com/forums/topic/437073-hks-gt2835-kai-kit-for-ecr33/

i do have an aftermarket ecu, i have a tuned greddy e- manage i am aware that the stock r33 ECU are very sensitive, if it only makes 10 to 15kw thats still better than the stock turbo and i wont have to worry about bout my stock turbo shitting itself, i did get that turbo for a cheap price.

Sell it and get a 2530 at least or a hypergear high flow, will make 230-240kw with stock response and save money as you'll just end up doing that eventually anyway, no point getting two tunes when you could just get one and get the power you want straight up

Edited by Rolls

Johnny's right ^^^

Ive still got my 2535. There worthless nowadays. I can barely give it away. My b rother took my spare and the one on the r33 will probably sit in the shed when I upgrade the whole hot side.

SELL 2510 BUY HYPERGEAR = WIN

yeah, you guys sound right, im selling it, ill just get a highflow.

put it on eBay and use key words like BOLT ON, RB20DET, HKS etc.. someone (hopefully not from this forum) will buy it :)

then get your stocker high flowed by Hypergear and fry tyres

I've been in a 2510 powered R33, made a little bit more than stock but really wouldn't hold over 1bar-1.1bar to redline. Unless its cheap/free or already came on the car i wouldn't bother.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • wedding eh.....I seem to get to more funerals than weddings or christenings these days....
×
×
  • Create New...