Jump to content
SAU Community

Recommended Posts

Hey Peeps

Thought I would do a write up as it seems there isn't one anywhere else and the 350Z or G35/V35 isn't the same..........

these colour codes were taken from a double din radio - non bose type.

12V Constant - Yellow/Pink.

12V Switched (Ignition) - Light Green/Pink.

Ground - Red/Blue.

Head Light Signal / Dimmer - Green/White.

Front Left Speaker: White & Black. (do not know polarity)

Front Right Speaker: Red & Green. (do not know polarity)

Rear Left Speaker: Yellow & Brown. (do not know polarity)

Rear Right Speaker: Pink & Blue. (do not know polarity)

There were 5 colours left over but I did not bother finding out what they were.

Cheers, Theo.

Very nice work. How did your replacement stereo fit in the slot? I did mine on the weekend, and I'm not 100% satisfied with the fit, but was in a rush at the time. Now ceebs taking everything apart again.

If you're lazy (like me) and can't solder for shit, I bought this ISO and it works well.

http://www.ebay.com.au/itm/Nissan-1995-stereo-ISO-WIRING-HARNESS-plug-connector-/260669742342?pt=AU_Car_Parts_Accessories&hash=item3cb1209d06&_uhb=1

it didn't sit in that flush either but cant do much about it with the counter sunk screw's.

I don't have a problem with soldering (I'm an electrician by trade) I'd rather know its right and have a good joint, not like these auto electricians who twist it together and tape it LOL

here's a photo.......

post-83704-0-37788300-1388985725_thumb.jpg

  • 3 weeks later...

Hey guys just to add to this, when I wired my speakers to an amp, the wires with a trace are negative and the solid coloured wire twisted with it is the positive one.Cheers

is this not common knowledge.

I'm just adding info to the post josh, as Theo noted in the first part that he did not know the polarity. So I guess you could say it's not common knowledge, or he's not a commoner, or he was taking the piss and I fell right into it.

In electronics line generally means positive.

^ The Focals I wired in use clear speaker cable and the one with red trace (line) is used as positive, which is opposite to the standard wiring setup so yeah...like Brick said. Every manufacturer makes their own rules

Scott can you paste a picture of all the head unit wires???

the Green/White wire and also the Red/Blue wire would be a start though.

need to figure out why my interior lights, parkers and tail lights aren't working........ I've replaced the BCM and still nothing :(

See if any of this helps. It seems the pages after the ones I've printed are predominately about the navi operation & repair.

AVpt1.pdf

AVpt2.pdf

What I normally do is find what I think I need in the English G35 version & then try to find the equivalent section in the Japanese M35 manual (translating where necessary). If there happens to be any changes to wiring terminals/colours etc, you may be able to catch it before cutting the wrong wire.

AV_lowres.pdf

Good luck & let me know if you need more.

Cheers, Leon.

  • 2 weeks later...

DONT NOT GROUND THE RED/BLUE WIRE!!!! it is actually the cabin lights/parkers/tail lights!!!

I think I've blown the BCM by doing so!!! FFS

don't worry, fuse you need is third on left row in the vertical fuse box near the battery, you have to remove the plastic shield in the bottom of the glass to access it!

it is called "tail ***", if i'm wrong on placement. surely you will find the reason in this box :yes:

Edited by Erop

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
    • wedding eh.....I seem to get to more funerals than weddings or christenings these days....
×
×
  • Create New...