Jump to content
SAU Community

Recommended Posts

Hey Peeps

Thought I would do a write up as it seems there isn't one anywhere else and the 350Z or G35/V35 isn't the same..........

these colour codes were taken from a double din radio - non bose type.

12V Constant - Yellow/Pink.

12V Switched (Ignition) - Light Green/Pink.

Ground - Red/Blue.

Head Light Signal / Dimmer - Green/White.

Front Left Speaker: White & Black. (do not know polarity)

Front Right Speaker: Red & Green. (do not know polarity)

Rear Left Speaker: Yellow & Brown. (do not know polarity)

Rear Right Speaker: Pink & Blue. (do not know polarity)

There were 5 colours left over but I did not bother finding out what they were.

Cheers, Theo.

Very nice work. How did your replacement stereo fit in the slot? I did mine on the weekend, and I'm not 100% satisfied with the fit, but was in a rush at the time. Now ceebs taking everything apart again.

If you're lazy (like me) and can't solder for shit, I bought this ISO and it works well.

http://www.ebay.com.au/itm/Nissan-1995-stereo-ISO-WIRING-HARNESS-plug-connector-/260669742342?pt=AU_Car_Parts_Accessories&hash=item3cb1209d06&_uhb=1

it didn't sit in that flush either but cant do much about it with the counter sunk screw's.

I don't have a problem with soldering (I'm an electrician by trade) I'd rather know its right and have a good joint, not like these auto electricians who twist it together and tape it LOL

here's a photo.......

post-83704-0-37788300-1388985725_thumb.jpg

  • 3 weeks later...

Hey guys just to add to this, when I wired my speakers to an amp, the wires with a trace are negative and the solid coloured wire twisted with it is the positive one.Cheers

is this not common knowledge.

I'm just adding info to the post josh, as Theo noted in the first part that he did not know the polarity. So I guess you could say it's not common knowledge, or he's not a commoner, or he was taking the piss and I fell right into it.

In electronics line generally means positive.

^ The Focals I wired in use clear speaker cable and the one with red trace (line) is used as positive, which is opposite to the standard wiring setup so yeah...like Brick said. Every manufacturer makes their own rules

Scott can you paste a picture of all the head unit wires???

the Green/White wire and also the Red/Blue wire would be a start though.

need to figure out why my interior lights, parkers and tail lights aren't working........ I've replaced the BCM and still nothing :(

See if any of this helps. It seems the pages after the ones I've printed are predominately about the navi operation & repair.

AVpt1.pdf

AVpt2.pdf

What I normally do is find what I think I need in the English G35 version & then try to find the equivalent section in the Japanese M35 manual (translating where necessary). If there happens to be any changes to wiring terminals/colours etc, you may be able to catch it before cutting the wrong wire.

AV_lowres.pdf

Good luck & let me know if you need more.

Cheers, Leon.

  • 2 weeks later...

DONT NOT GROUND THE RED/BLUE WIRE!!!! it is actually the cabin lights/parkers/tail lights!!!

I think I've blown the BCM by doing so!!! FFS

don't worry, fuse you need is third on left row in the vertical fuse box near the battery, you have to remove the plastic shield in the bottom of the glass to access it!

it is called "tail ***", if i'm wrong on placement. surely you will find the reason in this box :yes:

Edited by Erop

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...