Jump to content
SAU Community

Recommended Posts

God the frustration involved with trying to get just my setup working Mv aut0matics were a complete nightmare to deal with it started out 1-2 months that turned in 6 months then had to be sent back more that once, box in and out several times the torque converter didn't get balanced at all after they had a go at restalling it eg massive vibration through the car the excuses just kept rolling on and on I ended up getting the box checked out locally we found worn out old bits they had used it turned into a very stressful exercise. We did consider trying to make a kit but after all that bad luck we kinda gave up. If the RIPS was available when I started the build I would have went that way for sure its a much nicer combination that sits flat and comes with all the heavy duty hardware.

  • Like 1

Add to that 5k for the box these parts that you will require also.

Custom length and spline output shaft to suit transfercase.

Fabricated sump to clear the drive shaft when the box is massively rotated

Suitable length and angle pick tube to put the oil filter at the bottom of the new fabricated sump.

The dip stick takes some messing around to get it at a suitable height for when the gearbox is rotated.

Decent torque converter can be $1000-2000.

Shifter

Transcooler ect ect

Pretty quickly it gets to 10-12K.

Yep 100% - I was just talking the box itself. Nothing else.

The whole adventure is big dollars end to end

Power Glide

Hi guys, I have a r33 gtr, I'm looking to convert to autottrans, in order to get good times on drag strip.
What options do I have for a box that can withstand 1000hp.
Opinions and ideas would be great

  • 2 months later...

A bit of a thread bump but are there any recommendations for a 2WD car that will cope with about 600rwkw?

been toying with the idea of putting an auto in the S14 (its RB26) and have no idea what the best option is. I am sure TH400 and a glide will cope once built but what is the better option performance wise?

The patrol/300zx RE4 can be built to handle around that, and it should bolt straight up using the auto rb bellhousing.

If you end up heading that way, check out the PCS programmable controller, best thing you could do for a built auto, shits all over manualised boxes.

I thought a built RE4 shits itself around 400Kw+ from memory. (last looked into it 2 years ago)

2 speed glide, or 3 speed t400, really depends on your power band and slip, 2 speed or 3 speed to get you down the track quicker, 2 speed will rob a lot of power and turn it into heat.

Thanks guys.

the price is going to rule it out. The car has run 11.0 and 138mph and we don't want to cage it or put a chute on it as its a street car so the price is just too much for what I wanted it for. Which is only a handful of passes probably. I knew it wasn't going to be cheap but I wasn't expecting $5k or so for a box then convertor and accessories

I think I am just going to have to put some slicks on it and see how it goes to the 60 foot markers

Edited by ido09s

Sounds exactly like my situation with my GTT at the moment. Cant justify $5k for a box then all the additions on top. I've gone 11.0 @ 137 and 11.3@147 through the stock 5 speed. Id go slicks but worried about breaking things.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...