Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

I reckon I can get into the 1:55s. Just did a 1:56.395 with a few small errors. The following lap I was .23 faster at the first check point (halfway up the first straight) before I cocked up my braking point and drilled the wall

nice lap mad,

and have to agree. I just watched my replay and massive lock up running wide all the way into turn 2, and a stuff up here and there up around the top.

Also there's probably heaps of time in playing with the suspension

But this is fun, was getting starting to get bored with it but now have something to go for :)

new best time. 1:55.834. i definitely have a mid 1:55 there for the taking, but we are talking no mistakes to do it. on my 1:55 lap i was 0.906 up on my 1:56.395 lap at the final split (halfway down conrod straight). when i saw that come up i just did my best to keep it on the track and was a little bit over cautious into the last corner, and had a small moment up near reid park). the lap before that one i was 0.7 up at the last split and then cut the corner coming out of the chase a whisker too much and got the lap invalidated, so i didn't want to lose my super lap.

oh and i agree about having something to chase. it certainly makes licence test more entertaining as i usually have a crack to get the best time, or at least not the slowest, lol. although on the seasonal event for the ft-1 i did tonight i only did 2 laps to get the gold and couldn't be bothered trying to get a better time.

jeez, fast times in the R35s! i knew it would be quicker than the R34 I chose, but 6.4sec is alot! I just can't bring myself to buy a 35...

Tried an LFA but they just don't make enough power to be competitive. The JZA80 Supra does have the power, but Gran Turismo has never blessed the Supra with any traction at all. In the end they both run about 2:05.

The Honda NSX LM Road Car would probably give it a nudge, but that's not really a stock Japanese production car...

I might try a Z32 for a laugh.

Had a go with the r34 again. Managed to crack into the sub 2 minute bracket. 1:59.289. It was a super tidy lap. Still a tenth here or there to be had, but not much. Found a few lines that seem to work a bit better in a few spots so going to give the 35 another go

New record

Time: 1:55.207

Car: r35 gtr black

There is a 1:54 in that car. I did a 1:55.447 and then did a lap where I was 0.955 up at the last check point but went too cautious into the chase and the last corner and only got a 1:55.295. When I set the .207 lap I also managed to get the 3 magnificent laps trophy as the 2 laps before it were both low 55s. Had a bit of a zone going

1:59.289 in the 34 well done mad.

I got last night

Time: 2:00.580

Car: R33 GTR vspec

Still a pretty messy lap some lines I can do better

Still think I can get high 1:59's. I've kinda mangled the suspension and gear ratio settings so will have to sort that out again.

This is the most fun I've had with gt6 so far. Tried on-line last night and that was unbearable.

Had a bit of a play with my 34's setup and got a 2:00.372

Then gave in an bought an R35 Black. What an animal! 1st lap full power and lightweight mods but stock suspension and driveline, no wing, just the flat floor: 1:58.812. Soooo easy to drive after the R34! Then added clutch, tailshaft and LSD, still on stock suspension & no wing. Went back out and reeled these 3 laps in succession

1:57.367

1:56.714

1:56.015

before almost rolling it at the end of the next lap - don't clip the final kerb at Murray's corner!

post-15659-0-31678500-1390092309_thumb.jpg

Had a bit of a play with my 34's setup and got a 2:00.372

Then gave in an bought an R35 Black. What an animal! 1st lap full power and lightweight mods but stock suspension and driveline, no wing, just the flat floor: 1:58.812. Soooo easy to drive after the R34! Then added clutch, tailshaft and LSD, still on stock suspension & no wing. Went back out and reeled these 3 laps in succession

1:57.367

1:56.714

1:56.015

before almost rolling it at the end of the next lap - don't clip the final kerb at Murray's corner!

attachicon.gifMount Panorama Motor Racing Circuit_37.jpg

I've only got 1:57 in the 35.

haha that brings new meaning to fully sideways

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...