Jump to content
SAU Community

100,000Km service?

r0ma

By r0ma,
in General Maintenance

 Share

Recommended Posts

predator Grand Master

predator

Posted
Posted

Can be close to $1000 if you get the idler bearings replaced ($300 part).. can all add up..

Mine is currently at around $1300 .. and i took it in "just" for timing belt replace and waterpump replace.. but there were other things that needed doing that would be pointless to leave if everything was apart.

Link to comment
https://www.sau.com.au/forums/topic/43759-100000km-service/#findComment-895635
Share on other sites
benm Grand Master

benm

Posted
Posted

I'm sure it has been mentioned before in another thread but is their a list of parts replaced or work performed @ a 100,000km service?

My car is about to hit 93,000km and it's still driving as smoothly and beautifully as the day I picked it up (~55,000km) so im abit reluctant to go and spend $1,000 on labour/parts when it is quite possible that the speedo was "altered" before it even came to Australia (~3yrs ago) meaning my engine more than likely has already passed 100,000km (timing belt was changed at about 50,000km).

Normally with computers "If it aint broke, don't fix" however my R33 is hardling a $1,000 PC.

Link to comment
https://www.sau.com.au/forums/topic/43759-100000km-service/#findComment-895665
Share on other sites
benm Grand Master

benm

Posted
Posted

Ok just answered my own question: http://www.nismo.com.au/major_service.htm

Of the 29 jobs that UAS do their are only 8-10 jobs that I can't do myself because they require tools/knowledge that I don't have. The other ~20 items have all been done within the last ~4mths.

Link to comment
https://www.sau.com.au/forums/topic/43759-100000km-service/#findComment-895695
Share on other sites
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...