Jump to content
SAU Community

Alloy Airbox. Eoi

Trex

By Trex,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Trex Grand Master

Trex

Posted
Posted

Some of you might remember I had those deflectors re made for people using the std cooler and intake. About a week later I installed a front mount and pod and that was fine in winter. Now that it's coming into summer I needed to find a way to keep intake temps cooler. So I've come up with this airbox, I like this one better than any other one I've seen (I'm not biased at all) I'll be using the hole left over from the cooler return under the box to run some pipe to the lhs front grill for cold air.

Would anyone else be interested in one?

And what should I change to make it better/looks nicer?

Also is cardboard flammable? I might use alloy like the deflectors

post-108100-0-19533500-1389858981_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/437690-alloy-airbox-eoi/
Share on other sites
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Yes cardboard is flammable.

Aluminium would be fine. Some people use Perspex which you can bend with a heat gun.

Or you could use one of your deflectors with the stock airbox and maybe run some extra air into the airbox from behind the headlight.

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Lol thanks bob. I'm really keen to get some alloy and cut one out

Something like this? It's going to cost too much to get one made I think.

Yep you can get quite thin aluminium which is easy to bend and cut with some tinsnips or a nibbler if you have or can borrow one.
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

I was kidding about the cardboard part guys haha

I'm going to use 0.8 like the deflector. No way would I use tin snips, I was thinking maybe a jigsaw with fine teeth or a dremel or a die grinder?

A while since I did some metalwork but I think for soft metals such as aluminium you need coarse not fine teeth. This is a nibbler - they are quite expensive or you can (like I did) get a cheap attachment that goes in an electric drill from a store such as Bunnings:

http://www.makita.co.nz/products/detail.lsd?item=JN1601&-session=Makita:7694CC8C02dc220C0EsKHxACAECB

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

That looks pretty good! Thanks bob!

I made these a while ago and I'm just throwing up pics now because I'll get it done soon. Here was another intake I made, but they're going to be way too much effort for my skill level

You've done all the hard work. Just flatten out the cardboard and draw around it ...cut out the shapes and then bend!

Trex Grand Master

Trex

Posted
  • Author
Posted

I'm not too sure yet glyn. I was thinking about that last night,

It really depends on what people think they're worth, as it really is just a top and side piece that is put together by 3 small L brackets, and it is not fully enclosed (it looks it, and almost is). I will still like the look of this better than any other one Iv'e seen for sale.

I'm guessing anywhere from $80? It will take around 2 hours to make, and the cost of picking up the goods and the goods themselves. But I personally don't think too many people will buy one, if someone wants one i will make it.

I've just found some rubber edging. and the exact same bolts that are used on the deflector, so it will tie in perfectly. :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...