Jump to content
SAU Community

2X Magnaflow Race Series 3.5" Oval Mufflers

Serpandrew
 Share

Recommended Posts

Serpandrew Rising Star

Serpandrew

Posted
Posted

I've got two Magnaflow Race Series 14151 3.5" straight through oval mufflers for sale.

Had a new custom exhaust made to re-route the piping on my R34 GTR and went 3" instead of 3.5" as I didn't need 3.5" for my power goal.

These are INCREDIBLY quiet for 3.5" straight through mufflers, if you could have heard the car with these mufflers fitted you wouldn't have believed they are straight through - truly amazing mufflers offering great flow and sound. In fact I have the exact same muffler but the 3" version installed on my car right now.

So these were used for 3-4 months total and didn't do very many km's, maybe 1k at the most.

One of the two mufflers has rear hangers welded on to suit the rear rubber mounts of an R34 GTR, you can cut these off if you wish. Condition of both is great but as usual there's a few scratches/minor dents from being under a car. Nothing that will affect performance. Both are 304 stainless steel.

Willing to sell as a pair for $350 or $200 ea. Paid around ~$300? ea for these brand new (cant remember exactly).

6rrlo.JPG

This muffler with the hangers is in better condition visually, has no dents and no scratches apart from very minor ones.

6rrje.JPG

This muffler without the hangers has scratches on the bottom and a dent on the top as you can see as well as a few other small ones, once again these will not affect performance and you won't even be able to see them when it's fitted.

6rrql.JPG

6rrwe.JPG

Both mufflers look exactly the same internally as this.

Prefer cash payment on pickup but bank transfer is available and delivery can be organised at the buyers cost.

Location: Noble park VIC 3174

Phone: 0427 214 192 (Andrew)

Leroy Peterson Grand Master

Leroy Peterson

Posted
Posted

can vouch for how quiet these are for straight through.

my 3" no-cat straight through exhaust with 3" muffler same as above is around 100-105db at 4k i think.

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • Dose Pipe Sutututu
      Valve clearance for RB25det series 2

      By Dose Pipe Sutututu · Posted

      This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • GTSBoy
      Valve clearance for RB25det series 2

      By GTSBoy · Posted

      This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Kinkstaah
      Valve clearance for RB25det series 2

      By Kinkstaah · Posted

      Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...