Jump to content
SAU Community

Recommended Posts

Hi guys,

I've got another fob for my 2006 V36 and I went (twice) to Ferntree Gully Nissan to program it.

They could not program it without GTR technician as there is some security key (I believe NATS requires special card to program these models), went one more time today but no luck (I am not sure they really tried as this attempt was much shorter than previous), so they recommended me to talk to Infiniti people.

I have spoken to Inifiniti service but they turned to be completely useless, although they're selling the same car (G37) and definitely have Consult III

Now I'm kind of stuck. Anyone knows a Nissan dealer in Melbourne who is capable of programming a fob?

Link to comment
https://www.sau.com.au/forums/topic/437969-programming-a-new-key-for-v36/
Share on other sites

Just to let you know that I got mine done at City Nissan in November around $300 ish for the job, I had to purchase a blank key then they had the car for a day to get the special codes, then they sent the request over to Japan for the key code and then they contacted me two/four weeks later and dropped the car in for the day and all was great. I now have two fully working keys!

They have just moved to Abbotsford/Collingwood.

Call 03 8383 8800.

Hi guys,

I've got another fob for my 2006 V36 and I went (twice) to Ferntree Gully Nissan to program it.

They could not program it without GTR technician as there is some security key (I believe NATS requires special card to program these models), went one more time today but no luck (I am not sure they really tried as this attempt was much shorter than previous), so they recommended me to talk to Infiniti people.

I have spoken to Inifiniti service but they turned to be completely useless, although they're selling the same car (G37) and definitely have Consult III

Now I'm kind of stuck. Anyone knows a Nissan dealer in Melbourne who is capable of programming a fob?

Ferntree Gully Nissan did mine 3 years ago but they also supplied the key. How old is your V?

Wow it must have been the biggest hassle for them to do.

Sheesh, I must have been lucky.

on a side note I have found Paul at Osaka Imports helpful in sourcing 2006 V36 350GT SP parts.

I was told they need some key (20-digit or 12-digit, don't remember exactly) to program it using their tools

I thought once you've got consult 3 plus immo key card you don't need any codes as the tool goes into Chuck Norris mode and allow you to program any key.

Edited by Zveruga

haas just came across this looking at replacing the headlights of the V36 this weekend.

I have not tried this and I won't as I have working keys and don't want to stuff anything. (have I sold it enough yet too you!)

http://infinitihelp.com/diy/common/infiniti_reprogram_key_fob.php

this could just be for the infiniti however found we have a lot of the same setups.

Or just have a quick trip to SA and have a chat with Eye Candy!.

Without Smart Entry System

1. Close and lock all doors with the driver's side power lock/unlock switch.

2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast, system will not enter programming mode.

3. Insert key into the ignition cylinder and turn to the ACC position.

4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press the button more than one time in the above step. If the button is pressed more than one time, the programming procedure will not be successful.

5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver's side power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should flash. Repeat this step for each transmitter (including any existing transmitters).

6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver's side power lock/unlock switch and open the driver side door.

Thanks

Seems like the dealers aren't inclined to work on our imports as if they're looking to protect the local distribution channel. Stupid since they'll be getting paid for the service regardless. <br /><br />If I ever need to replace either of my two fobs, I think I'll have an easier time buying the security module for my Consult 3+ scan tool. Mongrels.

Without Smart Entry System

1. Close and lock all doors with the driver's side power lock/unlock switch.

Again.. this is for the central locking remote, not the immobiliser..

programming the immoboliser requires a trip to a dealer, or some sort of consult device if you have your BCM PIN

Again.. this is for the central locking remote, not the immobiliser..

programming the immoboliser requires a trip to a dealer, or some sort of consult device if you have your BCM PIN

Do you still need to know PIN if you have Consult III and the security card for immobilizer?

If it's that simple I'm thinking to buy Consult III and the card, make two fobs and sell both on eBay once done

Edited by Zveruga

not sure, but I think the dealer can program the immobiliser because they have the real Consult device and the NATS keycard and they don't need the PIN to do this.

I highly doubt you will be able to buy a NATS keycard as they are fairly tightly secured, and only available to dealers.

if you have the PIN, you can program NATS without the keycard.

Not exactly sure if this is the same for the 'intelligent keys/fob', but if Nissan go to that much trouble with keychip immobilisers then chances are the same security would be provided with the intelligent keys.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • He obviously had his reason for flipping you off. I wonder what it was...
    • Thats why I stay far, far away from Eastwood. only go there if I wanna eat Korean food 
    • I have to agree like, yesterday, I was driving down the warringah freeway towards the bridge when this jackass driving a beaten up Honda civic cut me off so suddenly it made me almost yank the wheel to avoid him hitting my car. Honestly and he had the NERVE to flip me off (or some other gesture Idk). Im a calm guy, but really some people just dont deserve to have a license, let alone be allowed to drive on densely populated roads/highways. If youre gonna cut through lanes at least use the damn turn signal
    • HPA do an interesting video on tuning, and Adrian shows on the dyno, moving from 10:1 to 12:1 (And I think even 13:1) and the power moves SFA. However, a couple of degrees of timing has a HUGE impact. Exhaust side of things will more be the length of the exhaust and how many bends and turns you have. The straighter you can keep it, the better. By a lot. Oh, and getting the diameter right. Bigger isn't always better. Going to big can actually lose you power.
    • I have to say, most people I see on the road fit the bill of atrocious drivers. Whether they be cowboys in their dual cabs, bogans in the Commodores, or the soccer mums. Pretty much most people on the road put zero freaking thought into driving. Barely look further up the road then the end of their bonnet, and have never even thought about how catastrophically wrong shit can go, by doing what they all deem as normal driving. Especially their late braking, racing to stopped lights, and sitting half a foot off the bumper of the car in front at 110km/h. Wanna know what's even better? By the time their kids get to be old enough to learn to drive, they've already got in the back of their brain what is normal driving, how annoyed you're allowed to get at people etc, and then their parents who actually have zero freaking skill at driving (Even though they constantly say "I've been driving for 20 years and never had an accident!") teach the little twerps how to drive, or should I say, how to make a car move. Literally watched a parent teach their L Plater, on a 4 lane freeway, that you just slam the brakes on, and push your way over, even with a B Double bearing down on you, and that's how you should drive, rather then, just keep going to the next exit. Same shit happens all the time for side streets etc, watching numpties pull dumb shit turns pushing across 3 lanes of traffic, rather than just go up the road another 30 seconds, and take the next turn that'll get you to the same location... Oh, and the damn right lane bandits. Or the retards driving along with their headphones in, and can't hear the ambulance or fire truck right up their ass about to run them over...   Pretty much, people drive on the road, like ego centric f**ks, and don't actually think how dumb shit their driving is, how it could easily kill them or someone else in a split second, or at the very least, how they're driving is contributing to all the shit they're bitching about on the road, like shitty congestion!
×
×
  • Create New...