Jump to content
SAU Community

Lenso D1Rs On R33 Gts25T (-4 Offset)

Bitsushiti
 Share

Recommended Posts

Bitsushiti Contributor

Bitsushiti

Posted
Posted

Hi fellas,

I'm currently shopping around for new a set of 18" wheels for my '96 R33 S2 GTS25T. I've been leaning towards a set of Lenso D1Rs. I currently have +30mm front guards, my rear arches have been rolled professionally and they also appear to have been slightly pulled (by 5-10mm or so) in comparison to standard S2s. I'm currently running Tein SS adjustable coilovers and have a set of adjustable rear camber arms stored in the shed on standby.

While hunting around on google images for 33 GTS25Ts rolling on D1R's, one particular set of pics stood out from the rest. The owner of the car in the pics below (from NZ) claims he's running 18x9.0 with -4 offset all round.

Original thread that pics are from can be found here: http://www.skylineowners.com/forum/showthread.php?t=193124

I thought I'd run this past you guys first before making any decisions and parting with any cash...

Considering my 33 is currently a daily driver, do you think -4 offset would be ok? or would I be better off going for more conservative/positive offsets to avoid headaches?

Any thoughts/suggestions/advice etc would be highly valued & appreciated.

Cheers!

IMG_2052.jpg
IMG_2051.jpg

IMG_2051.jpg

IMG_2050.jpg

IMG_2053.jpg

IMG_2029.jpg

Link to comment
https://www.sau.com.au/forums/topic/438470-lenso-d1rs-on-r33-gts25t-4-offset/
Share on other sites
colourclassic Mentor

colourclassic

Posted
Posted

Another consideration, do you plan to lower your car to that height? Low offsets look good on low cars, but practicality goes out the window. Running those offsets on a car which rides at a daily-friendly height isn't gonna look that good.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • f00stx
      Quieter performance exhausts (or muffler add-on options)

      By f00stx · Posted

      So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
×
×
  • Create New...