Jump to content
SAU Community

Recommended Posts

post-18510-0-61523200-1391962588_thumb.jpg

Selling our project Nissan Skyline R34, Giving it away for $4400ono. ( front end parts with driveline worth this)

1998 Nissan Skyline R34 GT-T turbo coupe rolling shell.
101kms
Cannot be registered in Australia, it is a statutory write off was a stolen and recovered vehicle in N.S.W.
has 300zx wide turbo wheels on the front
r32 gtst rear wheels
Original Turbo Manual model
Body complete front bonnet bumper XENON Headlights guards reo doors boot tail lights rear bar etc all in good condition
Driveline has LSD Full Brakes in great working order big brakes in front and rear. has original cross member still in place with power steering untouched,
full great interior with original airbags, steering wheel, gauges, cluster Seats front and rear in great condition, all interior is complete, barrel has been damaged when it was stolen previously.

Car has been bought back outright from the insurance company. its listed as a statutory write off so it cannot be ever registered in AUS. An absolute great parts car you can build two cars from all these parts, but even better would be great with an engine put in it a v8 1uz conversion or an sr20det manual thrown into it, would make agreat drift car, just throw a half cut into it or a motor and box, some work and bits and pieces and you have yourself a unique track animal, alot better and unique compared to a s13 or r32 skyline at the track.

The 34 is missing the engine, ecu and loom, exhaust and its also missing the manual gearbox kit (tail shaft, pedals, slave and clutch master cylinders) everything else is all there and hooked up, also has a complete aircon kit with compressor lines and condenser left in it. just the engine and manual conversion parts have been taken out of it, the car is complete otherwise and rolling. hasnt been sitting for long at all, we also have a rb25det neo + ECU + loom with a suspected blown headgasket, missing a turbo we can supply with the car for an extra $900.

post-18510-0-49145400-1391962577_thumb.jpg

post-18510-0-91914600-1391962598_thumb.jpg

post-18510-0-98641400-1391962608_thumb.jpg

post-18510-0-70701700-1391962618_thumb.jpg

post-18510-0-17032600-1391962627_thumb.jpg

post-18510-0-65472400-1391962635_thumb.jpg

post-18510-0-31070500-1391962644_thumb.jpg

post-18510-0-92838600-1391962654_thumb.jpg

  • 2 weeks later...
  • 4 weeks later...
  • 3 weeks later...
  • 1 month later...
  • 3 months later...


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...