Jump to content
SAU Community

Recommended Posts

Garrrhhhhhggggg, does anyone know anyone selling a R34 GTT cat? Surely you must know Mat :-D, or whats the next best aftermarket cat to get? not so much for flow but for emissions, thanks.

If its for emissions you really need those Euro cats or stock ones... Aftermarket generally flow higher and may not get you passed the test!

In saying that, i sold my last one to BenRThirty4 on here...

Yayy, I have finally found a stock cat haha lol, gonna put it on tomorrow and change my plugs again, I must have damaged one of the plugs while gaping them because I've got a ugly missfire on idle and once I boot it it's fine.

Rightio heres another update.

I really hate myself right now.

Had a emissions test today after installing a stock cat, changing the plugs etc, farken failed and just, you wanna know why? Farking Crap Shell V-Power fuel and octane booster, even the testing dude told me that quite a few people have just failed using shell fuel, after changing to BP as he recommends it passes, now I gotta wait till Wednesday to get it re tested as they only do emissions testing on Wednesdays.

I can't drive my car from Friday so whippie no car again till that crap is sorted and my engineer signs off the papers, theres my rant lol, thanks.

Hey guys

Well from what I have read and from my understanding, especially now that Shell have once again changed their V-Power is that Shell just add way to many additives, and it's these additives that help you fail the emissions test because first of all the "cleaning" additives make the combustion burn hotter - first of all yeah this is kind of a good thing in a way as if the fuel wants more heat to combust it will help with detonation but by it running hotter it also causes you're car to lean out and also produce more NOx which is one of the things they test at emissions testing.

Secondly due to all their additives (cleaners, detergents, alcohols, colouring) you're seals don't like it, for example I've read on many places that peoples valve stem seals have started drying up and many link it back to the fuel - don't hold me to this one as you cant really pinpoint this although I kind of get how it could.

Again with all of Shells additive's it forms a film over you're plugs hence causing slight misfiring and also sticky seals.

Another down side is that their fuel is no longer as pure as it's stuffed with heaps of their additives etc and on another note of this, fuel consumption is increased (I've noticed much better fuel consumption with BP and alike.

I have been using and recommending Shell V-Power ever since I got into the car scene which has been around about 10 or so years, but lately they have really let me down.

I'm in no way or form trying to boost sales or kill sales from any company, just putting up my thoughts, research and experience.

Not sure how fuel could affect seals given that fuel goes nowhere near them.....

I run V-power and Caltex 98

Cant pick the difference, Plugs come out nicely etc

Id say its more the 20 year old cat, plus octane booster shit was your issue, not the fuel

(I've noticed much better fuel consumption with BP and alike.

Define this please.

I'm considering switching to Caltex (The wollies servo is closer than 7Eleven, plus the prices are cheaper. I find the 15c hike overnight ridiculous and don't but from the 7 Eleven until prices come down on par with the Woolies and Costco servos). Plus there's a bunch of 'save 4c/L' dockets at home :P.

Don't trust Caltex though.

Not sure how fuel could affect seals given that fuel goes nowhere near them.....

I run V-power and Caltex 98

Cant pick the difference, Plugs come out nicely etc

Id say its more the 20 year old cat, plus octane booster shit was your issue, not the fuel

Not saying that it was the sole problem for me, I said that it contributed to my last test with the octane booster, well thinking about it it would kind of impact the valve stem seals because when the valves open the gasses go through there hence to "POSSIBLY" contributing to early failure of valve stem seals.

Define this please.

I'm considering switching to Caltex (The wollies servo is closer than 7Eleven, plus the prices are cheaper. I find the 15c hike overnight ridiculous and don't but from the 7 Eleven until prices come down on par with the Woolies and Costco servos). Plus there's a bunch of 'save 4c/L' dockets at home :P.

Don't trust Caltex though.

I've only ever heard good from Caltex, my preference now is BP then Caltex.

I've stuck with BP Ultimate for a long time - used to run V-power but found car felt smoother and more km/tank out of BP. Could be placebo, though.

Take that with a grain of salt though, car has done < 1000km in the last 12 months (though I changed fuels ~ 4 years ago)

Back when my R31 was running good, I got an extra 50km from 55L fill up switching from Shell 91 to Mobil 91. All highway driving, same condition and driving style (I drove to Sydney to Kiama and back, two days back to back).

I put Caltex E10 (the only one they had) in the R31, it would stall on cold starts and ran a tad rough. Didn't do any testing with that fuel as I went straight back to Mobil for many years of happy motoring.

Used BP 98 a few times, ran the same as Mobil, but they generally are more expensive so no point using BP.

I've stuck with BP Ultimate for a long time - used to run V-power but found car felt smoother and more km/tank out of BP. Could be placebo, though.Take that with a grain of salt though, car has done < 1000km in the last 12 months (though I changed fuels ~ 4 years ago)

Chemist says,"Placebo effect is good!" :P

Funny how Ash is somewhat affiliated with Shell.

Umm no Tats is affiliated with Shell, pretty sure Ash is on his own :teehee:

BTW the new Shell ad says:

post-74-0-00121700-1394094050_thumb.jpg

Can anyone tell me how a fuel could possibly add zip or vroom? Or is it just false advertising.

Umm no Tats is affiliated with Shell, pretty sure Ash is on his own :teehee:

BTW the new Shell ad says:

attachicon.gifshell.jpg

Can anyone tell me how a fuel could possibly add zip or vroom? Or is it just false advertising.

again with the placebos :P

also i posted this elsewhere - jen spotted you at ikea

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...