Jump to content
SAU Community

Recommended Posts

Garrrhhhhhggggg, does anyone know anyone selling a R34 GTT cat? Surely you must know Mat :-D, or whats the next best aftermarket cat to get? not so much for flow but for emissions, thanks.

If its for emissions you really need those Euro cats or stock ones... Aftermarket generally flow higher and may not get you passed the test!

In saying that, i sold my last one to BenRThirty4 on here...

Yayy, I have finally found a stock cat haha lol, gonna put it on tomorrow and change my plugs again, I must have damaged one of the plugs while gaping them because I've got a ugly missfire on idle and once I boot it it's fine.

Rightio heres another update.

I really hate myself right now.

Had a emissions test today after installing a stock cat, changing the plugs etc, farken failed and just, you wanna know why? Farking Crap Shell V-Power fuel and octane booster, even the testing dude told me that quite a few people have just failed using shell fuel, after changing to BP as he recommends it passes, now I gotta wait till Wednesday to get it re tested as they only do emissions testing on Wednesdays.

I can't drive my car from Friday so whippie no car again till that crap is sorted and my engineer signs off the papers, theres my rant lol, thanks.

Hey guys

Well from what I have read and from my understanding, especially now that Shell have once again changed their V-Power is that Shell just add way to many additives, and it's these additives that help you fail the emissions test because first of all the "cleaning" additives make the combustion burn hotter - first of all yeah this is kind of a good thing in a way as if the fuel wants more heat to combust it will help with detonation but by it running hotter it also causes you're car to lean out and also produce more NOx which is one of the things they test at emissions testing.

Secondly due to all their additives (cleaners, detergents, alcohols, colouring) you're seals don't like it, for example I've read on many places that peoples valve stem seals have started drying up and many link it back to the fuel - don't hold me to this one as you cant really pinpoint this although I kind of get how it could.

Again with all of Shells additive's it forms a film over you're plugs hence causing slight misfiring and also sticky seals.

Another down side is that their fuel is no longer as pure as it's stuffed with heaps of their additives etc and on another note of this, fuel consumption is increased (I've noticed much better fuel consumption with BP and alike.

I have been using and recommending Shell V-Power ever since I got into the car scene which has been around about 10 or so years, but lately they have really let me down.

I'm in no way or form trying to boost sales or kill sales from any company, just putting up my thoughts, research and experience.

Not sure how fuel could affect seals given that fuel goes nowhere near them.....

I run V-power and Caltex 98

Cant pick the difference, Plugs come out nicely etc

Id say its more the 20 year old cat, plus octane booster shit was your issue, not the fuel

(I've noticed much better fuel consumption with BP and alike.

Define this please.

I'm considering switching to Caltex (The wollies servo is closer than 7Eleven, plus the prices are cheaper. I find the 15c hike overnight ridiculous and don't but from the 7 Eleven until prices come down on par with the Woolies and Costco servos). Plus there's a bunch of 'save 4c/L' dockets at home :P.

Don't trust Caltex though.

Not sure how fuel could affect seals given that fuel goes nowhere near them.....

I run V-power and Caltex 98

Cant pick the difference, Plugs come out nicely etc

Id say its more the 20 year old cat, plus octane booster shit was your issue, not the fuel

Not saying that it was the sole problem for me, I said that it contributed to my last test with the octane booster, well thinking about it it would kind of impact the valve stem seals because when the valves open the gasses go through there hence to "POSSIBLY" contributing to early failure of valve stem seals.

Define this please.

I'm considering switching to Caltex (The wollies servo is closer than 7Eleven, plus the prices are cheaper. I find the 15c hike overnight ridiculous and don't but from the 7 Eleven until prices come down on par with the Woolies and Costco servos). Plus there's a bunch of 'save 4c/L' dockets at home :P.

Don't trust Caltex though.

I've only ever heard good from Caltex, my preference now is BP then Caltex.

I've stuck with BP Ultimate for a long time - used to run V-power but found car felt smoother and more km/tank out of BP. Could be placebo, though.

Take that with a grain of salt though, car has done < 1000km in the last 12 months (though I changed fuels ~ 4 years ago)

Back when my R31 was running good, I got an extra 50km from 55L fill up switching from Shell 91 to Mobil 91. All highway driving, same condition and driving style (I drove to Sydney to Kiama and back, two days back to back).

I put Caltex E10 (the only one they had) in the R31, it would stall on cold starts and ran a tad rough. Didn't do any testing with that fuel as I went straight back to Mobil for many years of happy motoring.

Used BP 98 a few times, ran the same as Mobil, but they generally are more expensive so no point using BP.

I've stuck with BP Ultimate for a long time - used to run V-power but found car felt smoother and more km/tank out of BP. Could be placebo, though.Take that with a grain of salt though, car has done < 1000km in the last 12 months (though I changed fuels ~ 4 years ago)

Chemist says,"Placebo effect is good!" :P

Funny how Ash is somewhat affiliated with Shell.

Umm no Tats is affiliated with Shell, pretty sure Ash is on his own :teehee:

BTW the new Shell ad says:

post-74-0-00121700-1394094050_thumb.jpg

Can anyone tell me how a fuel could possibly add zip or vroom? Or is it just false advertising.

Umm no Tats is affiliated with Shell, pretty sure Ash is on his own :teehee:

BTW the new Shell ad says:

attachicon.gifshell.jpg

Can anyone tell me how a fuel could possibly add zip or vroom? Or is it just false advertising.

again with the placebos :P

also i posted this elsewhere - jen spotted you at ikea

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi from Canada, Both of my calipers are starting to fail. My car is a 2005 M35 Stagea ARX and I can't seem to find any parts or any cross reference caliper that would fit my car. Is there a company or a similar caliper that would fit and I could replace the OEM one. Or if anyone knows where I can find a new OEM. Any help is very appreciated. Let me know!
    • Maf is a question mark but TPS  I have set at 0.47, the fact that I’m getting proper voltage range out of it with the key on leads me to believe it’s functioning properly. I’m getting proper voltages on basically everything. I still need to look up voltage ranges for z32 maf and test that 
    • Honestly no not at all, but it’s a very basic tune, it’s stock injectors q45 tps and z32 maf. Other than that it’s a completely stock base map. The file is from nistune and from my understanding if it was tune related I would be able to unplug maf and tps and it would still start even if it was a really shitty start. I have tried starting it with coolant temp, maf, and tps unplugged none of those 3 togethor or individually changes anything 
    • 🏆 Skyline Supremacy Meets Mount Panorama Magic 🏆 Join SAU NSW as we take the long way to Bathurst, the home of GTR greatness. Saturday 30th August 2025 7:00AM Meeting Hanna Park North Richmond 7:30AM Departure Cruise Via Bells of Line Road 9:00AM Arrival to Stop 1: Golden Poplars Meadow Flat 9:45AM Arrival to Final Destination: Mount Panorama Motor Racing Circuit Meet Location: Hanna Park North Richmond Stop 1: Golden Poplars Meadow Flat Final Destination: Mount Panorama Motor Racing Circuit   *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day   Highway gets as low as 10l/100km on my end so I'm not as worried about it being a mechanical issue. More likely just the tune on the haltech.
×
×
  • Create New...