Jump to content
SAU Community

Recommended Posts

Hi Guys,

im after a full 3 inch exhaust to suit my M35 can swap my standard one plus cash your way if your looking to go back to standard.

also after a full set of tail lights including the center brake light at the top. i want to experiment with some LED shapes inside the lights.

Thanks

Justin

I have the tail lights and stop light, but they are perfect off a low K Axis. I won't be selling them cheap.

You looking for S/H exhausts, or shiny new parts?

hey scotty,

If you Have the axis lights, i assume you have the reverse and the fog? thats what i have on mine but i actually want the 2 reverse lens....out of curiosity how much? sell them separately?

The exhaust, i really dont mind if its second hand or new. Just as long as the condition is good.

You have the snow pack. Are your wipers heated in the windscreen?

The Axis has the same snow pack, so I think the fog at the back. I will check tomorrow.

not real sure about the wipers, but yeah mine is the axis with all the options except sunroof.

Oh, you got the stagea tent....?

If not, you don't have all the options :P

Oh, you got the stagea tent....?

If not, you don't have all the options :P

that would be a rag top then hey? lol

i will chalk up another post for you guys!

Think this post has been hijacked.

Now if I had 2 of those Stagea tents, I could put one on each side....hummm.

Must slow you down a bit though. Car would be inclined to take off like a bird hey....

I wonder if they come in Pink?

output_Y10%20%20001.gif

Edited by ChrisB

Hi Guys,

im after a full 3 inch exhaust to suit my M35 can swap my standard one plus cash your way if your looking to go back to standard.

also after a full set of tail lights including the center brake light at the top. i want to experiment with some LED shapes inside the lights.

Thanks

Justin

Parts still needed! I don't need a bloody tent off the side of the Stagea though.

Are people just trying to get there post numbers up?

There are cars wrecking you can buy lights off.

Exhaust options are everywhere, Scotty, jap systems from cat back, custom items.

You think something is going to land in your lap? Just have a look around. Don't be lazy.

No thats just the way this forumn is. Rarely you will get a full system under 1600 unless its a little battered. Brand cat backs go for about 900-1200. www.justjap.com have a blitz cat back for about 1100 or you could source from japan but you will have to search for what you require. Or go to an exhaust shop and get one made. As in dumps you have 2 main options scotty dump (scotty mn35) and am performance (bigkevracing or ebay) hope this helps. Also there is or was a set of lights on ebay aswell not. Happy trails

No thats just the way this forumn is. Rarely you will get a full system under 1600 unless its a little battered. Brand cat backs go for about 900-1200. www.justjap.com have a blitz cat back for about 1100 or you could source from japan but you will have to search for what you require. Or go to an exhaust shop and get one made. As in dumps you have 2 main options scotty dump (scotty mn35) and am performance (bigkevracing or ebay) hope this helps. Also there is or was a set of lights on

ebay aswell not. Happy trails

Thanks for your positive input mate. Wish more people were like you.

As for the lights on eBay, I checked them out, sent an offer of $150 they accepted but then proceeded to tell me they have recently been cracked....

There are cars wrecking you can buy lights off.

Exhaust options are everywhere, Scotty, jap systems from cat back, custom items.

You think something is going to land in your lap? Just have a look around. Don't be lazy.

Wake up to yourself!

Isn't the forums about helping each other out?

I'm not lazy by any standards. I'm just seeing if anyone has second hand items I need. I know what's available new. You don't need to tell me, its common knowledge.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...