Jump to content
SAU Community

Recommended Posts

Hi Guys,

im after a full 3 inch exhaust to suit my M35 can swap my standard one plus cash your way if your looking to go back to standard.

also after a full set of tail lights including the center brake light at the top. i want to experiment with some LED shapes inside the lights.

Thanks

Justin

I have the tail lights and stop light, but they are perfect off a low K Axis. I won't be selling them cheap.

You looking for S/H exhausts, or shiny new parts?

hey scotty,

If you Have the axis lights, i assume you have the reverse and the fog? thats what i have on mine but i actually want the 2 reverse lens....out of curiosity how much? sell them separately?

The exhaust, i really dont mind if its second hand or new. Just as long as the condition is good.

You have the snow pack. Are your wipers heated in the windscreen?

The Axis has the same snow pack, so I think the fog at the back. I will check tomorrow.

not real sure about the wipers, but yeah mine is the axis with all the options except sunroof.

Oh, you got the stagea tent....?

If not, you don't have all the options :P

Oh, you got the stagea tent....?

If not, you don't have all the options :P

that would be a rag top then hey? lol

i will chalk up another post for you guys!

Think this post has been hijacked.

Now if I had 2 of those Stagea tents, I could put one on each side....hummm.

Must slow you down a bit though. Car would be inclined to take off like a bird hey....

I wonder if they come in Pink?

output_Y10%20%20001.gif

Edited by ChrisB

Hi Guys,

im after a full 3 inch exhaust to suit my M35 can swap my standard one plus cash your way if your looking to go back to standard.

also after a full set of tail lights including the center brake light at the top. i want to experiment with some LED shapes inside the lights.

Thanks

Justin

Parts still needed! I don't need a bloody tent off the side of the Stagea though.

Are people just trying to get there post numbers up?

There are cars wrecking you can buy lights off.

Exhaust options are everywhere, Scotty, jap systems from cat back, custom items.

You think something is going to land in your lap? Just have a look around. Don't be lazy.

No thats just the way this forumn is. Rarely you will get a full system under 1600 unless its a little battered. Brand cat backs go for about 900-1200. www.justjap.com have a blitz cat back for about 1100 or you could source from japan but you will have to search for what you require. Or go to an exhaust shop and get one made. As in dumps you have 2 main options scotty dump (scotty mn35) and am performance (bigkevracing or ebay) hope this helps. Also there is or was a set of lights on ebay aswell not. Happy trails

No thats just the way this forumn is. Rarely you will get a full system under 1600 unless its a little battered. Brand cat backs go for about 900-1200. www.justjap.com have a blitz cat back for about 1100 or you could source from japan but you will have to search for what you require. Or go to an exhaust shop and get one made. As in dumps you have 2 main options scotty dump (scotty mn35) and am performance (bigkevracing or ebay) hope this helps. Also there is or was a set of lights on

ebay aswell not. Happy trails

Thanks for your positive input mate. Wish more people were like you.

As for the lights on eBay, I checked them out, sent an offer of $150 they accepted but then proceeded to tell me they have recently been cracked....

There are cars wrecking you can buy lights off.

Exhaust options are everywhere, Scotty, jap systems from cat back, custom items.

You think something is going to land in your lap? Just have a look around. Don't be lazy.

Wake up to yourself!

Isn't the forums about helping each other out?

I'm not lazy by any standards. I'm just seeing if anyone has second hand items I need. I know what's available new. You don't need to tell me, its common knowledge.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
    • Fuark, at least the motor survived. What brand was the fitting that snapped?
    • Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
×
×
  • Create New...