Jump to content
SAU Community

Recommended Posts

The lesson I learnt today, is always make sure your bonnet is securely latched.

Whilst doing 100km/hr down Roe Hwy and yourbonnet pops up the results are not nice:( I now have a very bent bonnet, a smashed windscreen and a caved in roof.

It's also very difficult to see where your going when you have a bonnet covering your windscreen. I've learnt the hard way, and will be using bonnet pins to hold down my next bonnet. It will be at the smash repair place for many weeks:(

But you have to laugh about these things:D

Will try and post some pics up on Monday for you amusement:D

Cheers

Paul

Link to comment
https://www.sau.com.au/forums/topic/43944-learning-lessons-the-hard-way/
Share on other sites

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

OMG. You gotta laugh hey, it's the only way you'll be able to cope with the repair bill!

Funnily enough, the exact same thing happened to a mate of mine, his bonnet flew up doing 100+ also, bent the hinges right back, smashed the crap outta the roof too, luckily he didn't need a new roof though!

Paulie, think it's a sign that a CF bonnet should be installed!

Holy Shit Paul can only imagine it would have scaried the f*#k out off you. But good to see that the only medicine is to have a laugh about it coz get shitty will get you no where. As for a CFB well i can tell you they flex around like you wouldn't believe, can scare the hell out of you when you are sitting behind another car. Come to think of it I should invest in some bonnet pins.

Hope the repairs go smooth for you. :(

I appreciate all the thought's guys, but with luck insurance should cover the damage, so it's just one of those things that happens.

Yes, it did scare the crap out of me, and with a bonnet covering the windscreen it doesn't give you much room to see where you are going;) I'd like to go cbf, but the cops don't think that is safe:rolleyes: .

If anyone does find a R33 roof anywhere then please let me know, as that will be the only major holdup to repairs.

Thanks

Paul

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...