Jump to content
SAU Community

Recommended Posts

Hi gents,

I am looking for some information on the child anchor points that were unceremoniously drilled into the parcel shelf of my R34 coupe. Specifically, what are the legalities surrounding these? The only info i could find on the net was concerning children using booster seats etc.

I do not have children, nor do i intend to drive children around in the Skyline, so I would like to remove those unsightly 'anchors' - which i have done as of today, when i fitted my new 6 inch Kicker speakers.

If you look at the photo, you'll see the bars going across the speakers (factory speakers pictured). If i remove those, am I in a defectable position?

Can i simply keep only the central anchor point? (Seeing there is a large hole there anyway) I would like to cover the gashes in the speaker covers.

If i keep those bars (even though they travel right across the bloody speakers!!!) is that good enough for a policeman to see that i have the anchor points? As i said, i couldnt locate the relevant bit of legislation. (All that i could find is that literally no one else in the world can supply our baby seats, because they aren't up to the Australian standard... of course.)

Thanks!

Mick

post-126851-0-83347800-1393160833_thumb.jpg

Hi,

If it helps, to pass compliance, my car just had to have the bars under the parcel shelf. I had to go back to get the holes puched through the speaker covers once I did fit a baby seat. My opinion is that you don't need the clips, just the bars underneath so no real modifications are needed to fith them. If queried, say that the bars are there and that for fitting the baby seat, the bolt needs to be put back in with a clip. I know in our other old car, we had to buy a bolt and plate regardless and it was an AU delivered car.

Damien

Hi,

If it helps, to pass compliance, my car just had to have the bars under the parcel shelf. I had to go back to get the holes puched through the speaker covers once I did fit a baby seat. My opinion is that you don't need the clips, just the bars underneath so no real modifications are needed to fith them. If queried, say that the bars are there and that for fitting the baby seat, the bolt needs to be put back in with a clip. I know in our other old car, we had to buy a bolt and plate regardless and it was an AU delivered car.

Damien

Hi Damien,

Cheers for the reply! Just wonder what state you're in? I'm in NSW, not sure if this legislation differs between the states?

Overall I'd love to avoid having the bars there at all - I'm no audiophile, but I'm kinda annoyed that i have a heavy bar right across my speakers. The bar actually touches the tweeter (little speaker in the middle) of my new speakers, which i paid $100 for (so not especially cheap).

Thanks!

I would just take them out and fly away :P

I thought you could only *fly away* on the internet? lol

Hi,

I'm in QLD but I thought the restraints/compliance process is national.

It sounds like it is, and I've concluded that you don't need the clips, but do need a place to anchor the restraints (ADR defies logic again)

Some Emptynesters or DINKS have 'pretend' restraints.

I'm tossing up whether to remove the plates across the speakers (not great for audio quality) and then putting on the "fake" clips, or reinstating the plates and covering the speakers with acoustic cloth to hide the ugly hole where the clip was that i'll remove. Or maybe I'll just remove both.. haha. I just can't believe that this would lead to a defect, honestly. If I had a child in the car, damn right I'd want it to be as safe as possible, but as i dont, i completely disagree about needing the anchors.

I'd be really suprised if it were an issue when not carrying a child, but if worried just leave the anchor point there and take the bars away u would have to be very unlucky I rekon

I think that's the go, I'll have a look on the weekend how i can connect them in a non-permanent fashion though! any ideas, gents?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...