Jump to content
SAU Community

Recommended Posts

Gday All,

A couple of times recently while driving the rb20 cefiro ghettomobile, the engine randomly lost all power, like I'd switched the ignition off. By pumping the accelerator it will then fluttered a little then pick up power and continue driving normally.

I replaced the ignitor and cas then drove it last night and the problem is still there, its also hard to start.

Its an R32 RB20det running in an A31.

Should i be looking at TPS, the AFM or what?

Thanks for any help or advice you can offer,

Agent A31

Thanks for your reply, Its a bit of a weird problem.

I will investigate the AFM and give it a clean for starters.

Its not a missfire because all cylinders lose power at the same time stay off for a few seconds then return,

so Im thinking its probably not coils this time. (Ive had dodgey coils before and been through that).

Fuel pump is a bosch 040 not a 30 yr old flogged out nissan job so Im leaning away from that option too.

thanks very much for your suggestions

Agent A31

  • 1 month later...

Ok sorry to drag this up again fellas but Ive still got this problem.

So far:

-my coils are fine

- Ive cleaned the z32 afm- is there anyway of checking this or do I just have to bite the bullet and buy another if I suspect it?

will be checking fuel pump next.

Thanks for any help

Agent A31

Ok so today I pulled out the 040, it looks fine with only about 2 specs of dirt on the mesh filter. I put in back in and pulled off the fuel supply hose to the engine, with ignition on it pumps quite a bit of fuel so Im guess the pump is ok and I should start looking at the AFM.

Anybody got any more suggestions?

Thanks

Agent A31

You need a pressure test on the pump. Just because it pumps a large volume with no restriction, doesn't mean that it can keep up when the backpressure rises. Plumb fuel pressure gauge into fuel line and see if it maintains pressure as you run the engine at load.

Having said all that, it probably is the AFM (or something else electronic).

Hey mate, cant think of any particular circumstance causing this, it happened once immediately after I gassed it hard and changed gear, another time while cruising at steady highway speed, so seems a bit random? Any more details of your own situation?

AgentA31

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That was the first session so not a lot to take from the day. It was low 20s ambient and the coolant had got to 110 (and obviously had some pressure!) so that still needs to be addressed. I haven't downloaded the data yet but will. I had refilled the auto trans with Redline DT6 because it claimed the best viscosity I could find at 100o. It wasn't really long enough to get a good feel for that; while the trans got to 100o in the session it still wasn't shifting crisply as I hoped. I think I'll try a few more sessions before judging. No steering motor overheat but I'd hope not in only 1 session! But finally the suspension; it was night and day over the standard stuff and the car was a couple of seconds quicker on the same crappy tyres, which is a huge difference. I'll stick with that and get some sway bars and a mechanical diff sorted too and see how that all goes together
    • I guess it’s partially a compromise of how my car is used, wanting to be able to switch from drift to grip with track side on-car adjustment. Also partially with the way the knuckles are set there is more static camber but less dynamic camber gain. 
    • OK, so update from the track day on Friday It was a classic "an unfortunate series of events'. There were a few cars around and when i checked my mirror coming out of the fish hook I notice some smoke from the rear of mine. Looked again and it was getting much worse, I figured I'd blown a turbo or something to got off it and pulled off the racing line. However.... since it is a left hairpin into a right kink, I was on the inside of the next corner. There was a car passing me on the left and a big drop off over the ripple strip on the right......and someone had knocked the witch's hat that was on the apex about 1m onto the track. So, between those 3, I decided to mow down the cone and not damage my car/the other car. Right choice, but surprising result.  The car decided the cone was a small pedestrian so it blew the rear bonnet hinges up to protect their head in the upcoming person to car impact....I didn't see that coming and like an airbag deployment it happened super fast. Straight into the pits from there, everything was driving fine but it became clear it was a coolant leak not smoke, it was billowing up onto the windscreen. Onto the trailer and home. I'll do a separate thread about the repair (once I work out what it is ), but the immediate problem was the bonnet wouldn't open because the front was pinched onto the front bar and would not release. Ultimately we unbolted the hinge from the bonnet, pulled it back a little and it released from the front OK. "There's your problem", the top radiator hose had popped off at the radiator.
    • Yeah that looks like great caster, but I'd suggest trying less front camber some time and seeing if it helps with braking without reducing mid corner speed too much
    • I ended up setting the rear 5mm higher than normal to give some clearance.  My plan is to run the least camber I can in the rear which I think with the extra width is going to need to be -1.75 to -2.00° just to get clearance.  Guards have been rolled and pulled as much as they can/I would be wanting to.  front has the Acostal knuckle with the KPI change and the drop etc. So should be okay with the existing settings I have run with AR1s etc Front: Toe total -2mm(1mm out each side) Caster +7.5° Camber -3.8° Ackerman +15°
×
×
  • Create New...