Jump to content
SAU Community

Window Stuck Down :'(

red_spider

By red_spider,
in Four Door Family & Wagoneers

 Share

Recommended Posts

red_spider Contributor

red_spider

Posted
Posted

Heyy sau

So I've got my a pretty bad situation... My driver's side window won't come back up :(

So through pulling the trim off and going through isolating the switch and motor I have my self a broken switch and broken motor.

Called my local Nissan and they quoted me $570 for the motor and $194 for the switch... But said it's now illegal for them to provided me with part numbers.

I have the motor one as 80730AL501

But with vigorous searching of sau, google for both the m35 and v35 sedan no result for the switch. Could anyone help me out with the part number please?

Thanks you

Link to comment
https://www.sau.com.au/forums/topic/439812-window-stuck-down/
Share on other sites
jackbh241 Collaborator

jackbh241

Posted
Posted

They come up all the time on yahoo japan if you can afford to wait for shipping (mine did the same and I just suction cupped/duct taped it shut for a few weeks... cops didn't like it but haha). Fyi I ended up buying a passenger side motor V35 motor and just took a little cutting back of the excess plastic to get it to fit. Lost the Auto Up function but for the amount I saved it was worth it (was about 150 for regulator and motor). They do come up on Ebay from time to time as well. Hope that helps.

  • Like 1
Duncan Grand Master

Duncan

Posted
Posted

BTW if the parts department told you it was "illegal" to give you a part number you should report them to their manager.

They may decide not to give you the part#, but it is certainly not illegal.

  • Like 1
red_spider Contributor

red_spider

Posted
  • Author
Posted

They come up all the time on yahoo japan if you can afford to wait for shipping (mine did the same and I just suction cupped/duct taped it shut for a few weeks... cops didn't like it but haha). Fyi I ended up buying a passenger side motor V35 motor and just took a little cutting back of the excess plastic to get it to fit. Lost the Auto Up function but for the amount I saved it was worth it (was about 150 for regulator and motor). They do come up on Ebay from time to time as well. Hope that helps.

Thinking of just putting the window up on the weekend and blocking it to stay up, auto up and down is my favourite feature :'( but thank you for the information and I'll keep it in mind :)

red_spider Contributor

red_spider

Posted
  • Author
Posted

BTW if the parts department told you it was "illegal" to give you a part number you should report them to their manager.

They may decide not to give you the part#, but it is certainly not illegal.

Don't worry Duncan I had a good laugh about it, there was two Guys that owned imports but they never answer the phone :(

Brick Mentor

Brick

Posted
Posted

Thinking of just putting the window up on the weekend and blocking it to stay up, auto up and down is my favourite feature :'( but thank you for the information and I'll keep it in mind :)

Agreed, auto is the goods

Another option is you can just get an auto elec to rebuild the motor from yours. I got quoted $80 to get one rebuilt when mine failed, but then i picked up a second hand one for way less and just stuck that in.

Daleo Grand Master

Daleo

Posted
Posted

Agreed, auto is the goods

Another option is you can just get an auto elec to rebuild the motor from yours. I got quoted $80 to get one rebuilt when mine failed, but then i picked up a second hand one for way less and just stuck that in.

I remember someone deep in the sands of time said the motor brushes were very similar to an R33 window motor.

Howaitonaito Mentor

Howaitonaito

Posted
Posted (edited)

Ive had this happen to me on many occasions.

What i did was slightly tap the outside door and then get in the car while holding the window switch up close the door with a bit of force and it should go back up. Should

It may or may not work for you but give it a try, and if it does work dont put it down again.

Good luck

Edited by Howaitonaito
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      New R32 owner soon

      By joshuaho96 · Posted

      Hard to say, just pop the rocker covers off and have a look if you think it's cammed. You probably need to replace the valve cover gasket/half moons anyways.
    • niZmO_Man
      R32 Nostalgia

      By niZmO_Man · Posted

      From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
    • niZmO_Man
      New R32 owner soon

      By niZmO_Man · Posted

      Remember this is 1988 tech.
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • Duncan
      1992 R32 GT-R Race Car

      By Duncan · Posted

      heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
×
×
  • Create New...