Jump to content
SAU Community

Recommended Posts

I looked at a series 2 r33 today and noticed a few things on the test drive. The price is good and the car seems to run and drive quite well. It's a 94 series 2, basically standard except for an aftermarket exhaust and bov.

On boost there is a sort of tinny rattle noise that is reasonably loud. Its only when you get up in the rpm range. It sort of sounds like a heatshield or maybe one of those metal exhaust gaskets rattling...I hope. I guess could also be a noisy cat converter? Any suggestions on what else this might be, ie. anything serious?

The only other problem was a slight notch going into third gear, like a synchro problem I guess. Curiously it doesnt do it when you're spanking it into gear, only when you're sort of cruising and casually slot it in. Is this something that could maybe be sorted with a change of g/b oil, or more likely to be a synchro that will only get worse with time?

Appreciate any suggestions or advice.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/439816-advice-on-r33-s2-purchase/
Share on other sites

First of all if its a 1994 model, its not a series 2

Are you sure its not pinging up the top? not sure what mods it has?

Gearbox problem could just be old/crappy oil, but not ruling out a bigger problem. Sounds a bit like it could just be oil but

drop some Redline lightweight into it, problem solved :)

(not sure if it's a bandaid solution or not)

but every single RB box has that same "notchy" feeling when using ordinary VMX80 manual fluid.

Yeah I discovered last night from the engine number that it's series 1, just the update with s2 coils and whatnot (according to the engine number). Is there anyway to tell if it's the original engine by comparing the numbers?

The rattle sounds external, and I'm pretty sure it's underneath the car. The Gearbox thing really is a pretty slight notch, and there's no sign of it when you're Getting up it so hopefully a service will resolve that.

Cheers guys made me a bit less nervous about my first skyline

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...