Jump to content
SAU Community

Recommended Posts

Hi all,

Need to clear some parts, most parts are located in Cronulla NSW unless noted. Happy to post at cost.

Brand new LS1 coil packs, with leads and bracket to suit, coils sit on the inlet cam cover/injector wiring cover. $500

post-25126-0-09303500-1395026319_thumb.jpg

R33 Series 2 steering wheel, good nick, complete with airbag, red stitching $150

post-25126-0-43819200-1395026278_thumb.jpgpost-25126-0-98471200-1395026273_thumb.jpg

R33 GTR rear Carbon Fibre wing insert. $300

post-25126-0-61976700-1395026312_thumb.jpg

Brand new GTX2863 x 2, can include rear housings to suit $2400

post-25126-0-18165300-1395026303_thumb.jpgpost-25126-0-89240700-1395026299_thumb.jpgpost-25126-0-26905000-1395026308_thumb.jpg

Used HKS GT2530 x 2 including actuators, missing a few studs, bit of shaft play nothing major. $1800

post-25126-0-04164200-1395026223_thumb.jpgpost-25126-0-80995900-1395026286_thumb.jpgpost-25126-0-91202500-1395026293_thumb.jpg

Stagea C34 Auto coilovers, used, unknown spec $400

post-25126-0-32411700-1395026202_thumb.jpgpost-25126-0-92156000-1395026211_thumb.jpgpost-25126-0-21071400-1395026219_thumb.jpg

R33 GTR ARC airbox, used filters are near new, missing metal retainer, $300

post-25126-0-37734800-1395026195_thumb.jpg

R33 GTR bonnet, used, $350 (located at Parramatta)

post-25126-0-29242400-1395026173.jpg

Damaged R33 GTR genuine front bar, as pictured $100 (located at Parramatta)

post-25126-0-25565800-1395026190_thumb.jpgpost-25126-0-66910900-1395026184_thumb.jpgpost-25126-0-23739200-1395026179_thumb.jpg

1000cc Bosch injectors Sold pending $

C34 Series 1 Days Side skirts & rear skirt complete with brackets $180

C34 Series 2 taillights full set $150

PM me if interested,

hey mate, with the LS coils - what do you mean by leads and bracket to suit? wired up to plug into existing harness? if so 33s1 or s2?

Edited by cicatriz7

You will need to wire them in, no plug and play loom provided.

6 x LS1 coils,

6 x MSD leads (from coil to spark plug),

2 x stainless steel bracket to mount to injector plate cover,

Prices updated and sold items removed.



Brand new LS1 coil packs, with leads and bracket to suit, coils sit on the inlet cam cover/injector wiring cover. $500



R33 Series 2 steering wheel, good nick, complete with airbag, red stitching $120



Brand new GTX2863 x 2, includes anti surge compressor and 2530 turbine housings to suit GTR $2300



Used HKS GT2530 x 2 including actuators, missing a few studs, bit of shaft play nothing major. $1700



Stagea C34 Auto coilovers, used, unknown spec $350



R33 GTR ARC airbox, used filters are near new, missing metal retainer, $300



Damaged R33 GTR genuine front bar, as pictured $80 (located at Parramatta)



1000cc Bosch Ev14 flow matched injectors (anodised adaptors, plug n play adapters, suit 11mm rail) $600



C34 Series 1 Days Side skirts & rear skirt complete with brackets $150



C34 Series 2 taillights full set $150


I'll put up pics of the stagea gear on the weekend.

The steering wheel itself will fit, however from memory the airbag module loom is different.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 12+ months passed so they have no obligation to do a warranty claim. It leaked from the rear circuit. Front circuit was fine, but I tried many times to bench-bleed and in-car bleed (wasted 1L of Penrite racing brake fluid) to no avail. Threw my old BM50 or whatever the standard R32 GT-R BMC is, brakes went back to normal. So from my very limited anecdotal experience, I cannot recommend HFM, even though a lot of their products looks good. Just my experience (I have a genuine Nissan BM57 in a box waiting to be installed now).
    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
×
×
  • Create New...