Jump to content
SAU Community

Recommended Posts

Harro,

Item 1: NPC Carbotic Clutch Disc

Price: $300

Comments:

  • Thought my clutch died, turns out my clutch fork was fractured & my bearing carrier was the incorrect
  • Scott from Western Clutch measured it and said it's about 0.04mm worn only, near new
  • Disc is under 2 years old, has had about under 14000 km street driving and 3x track days, car makes under 200kW

Reason for Sale: Downgrade to a lighter disc that's more drivable for the street

Item 2: Toshi Remapped R33 Series 2 ECU

Price: $300

Comments:

  • Difference is day and night, others will understand
  • AFRs super safe, sits about 11.7~11.8 all the way at 0.9bar - has been taken to the track many times
  • Tuned for full exhaust, front mount, healthy fuel pump, and boost at 0.9 bar, ~13psi
  • Please check your base timing, set it at exactly 15 on idle with the TPS disconnected
  • Will install and check your base timing for free if you're local

Reason for Sale: New turbo & ECU

Item 3: Stock R33 Series II GTS-t Manual Radiator

Price: $50

Comments:

  • Decent condition
  • Doesn't appear clogged or anything

Reason for Sale: hast tag becauseracecar lol

Item 4: Stock R33 Series II Front and Rear anti roll bars / sway bars with bushing & brackets

Price: $80

Comments:

  • Decent condition
  • No cracked bushing

Reason for Sale: hast tag becauseracecar lol

Link to other stuff for sale too:

http://www.skylinesaustralia.com/forums/topic/433062-fs-syd-r33-gts-t-part-brake-pads-subframe-collars-wheels-gauge-holder-misc/page-2

Location: Canley Vale, NSW, 2166

Contacts: PM or Reply Here

As always, will trade for beer and/or alcohol too :woot::woot:

Item 5: Stock R33 Series II Stock Turbo


Price: $250


Comments:


  • Comes with elbow
  • Has minimal shaft play
  • No funny oil leaks
  • Exhaust wheel has not fallen off yet LOL

Reason for Sale: hash tag becauseracecar lol


buy my shit, will trade some stuff for:

  • 2x NEW Nitto NT-05 in 255/40/17
  • 6x 1000cc OR 1200cc sidefeed injectors

What has been done to the ECU? Was it socketed for a programmable EEPROM or Nistuned?

hey mate!

Socketed ECU with a reprogrammed ROM

Don't think anyone has installed the new Type 6 Nistune for R33 ECUs yet, I know a few of the Stagea boys have though.

Yeah I have done up a Z32 ECU with a Nistune board... but I thought a quick ECU swap for more boost would be a nice thing. I don't have the cash for a tune (and possibly never will) and i'm maxing out the AFM at 11psi. =-/

MMMMM will the clutch plate work in a jim berry pressure plate

Dooo it!!!!!!!!

Also ECU sold :)

MMMMM will the clutch plate work in a jim berry pressure plate

Can't see why not? After all NPC pressure plates are modified Exedy covers :)

Dooo it!!!!!!!!

Also ECU sold :)

Dammit...snooze you lose :domokun: was about to PM you :( Mayb I should just keep saving and go the way of a PowerFC.. Goodluck with selling rest of your goodies

Dammit...snooze you lose :domokun: was about to PM you :( Mayb I should just keep saving and go the way of a PowerFC.. Goodluck with selling rest of your goodies

buy my adaptronic ECU and it will come with a free modded car for $12k :)

I like breasts

Stock Turbo & Dump $250

Clutch $200

Stock ABS Diff $250

Stock Rad $20

New Braided Oil Feed $50

Stock Front and Rear Sways $40

Stock S2 AFM $50

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...