Jump to content
SAU Community

Recommended Posts

Pretty much as the title says. It's and auto s1 stagea but still just a 25. All stock except bov have been plumbed up. had this issue before I did that. Read heaps of forums and did most of the things suggested (cleaning aac etc) afm seems fine but hard to call. Any ideas? It's drivable but will stall out when you back off at a slow rolling speed so I pretty much idle through carparks.

have you set your idle correctly? get the car up to temp stop the car...unplug the tps....start the car...turn the idle screw on the aac valve till you have it idling at 750. turn car off...plug the tps back in.....if it still runs like shit after that it could be your tps.

  On 29/03/2014 at 11:47 AM, FawDawz said:

Cheers badgaz will do that in the morn. Bov has been deleted completely and made a new intake pipe

Why?

Put recirc bov back on.

The reverb screws around with the airflow meter reading leading to the issue you have described.

Well, your initial post isn't particularly clear. I suppose you are in a rush for people to help fix your problem.

Somehow bov plumbed up equals blocked off?

Was it previously the stock bov recirculating as per stock?

I usually pretty much idle through car parks also, lots safer than boosting through them.

Superben. Firstly thanks for a mature comment. the engine was completely stock in every way and had the ssame issue. As for the bov, New intake pipe deleted that line, blocked other lines and put a plate over the bov where it goes into the manifold.

It's not the issue.

As for idling through Carparks I have no issue with that. It's a daily running stock boost. It IS drivable. just any speed below around 50km if you completely release the throttle it will die the revs down to almost a stall.

Productive comments are appreciated. if not fk off to boostcruising. Cheers

Typical as the new guy to a forum you would ease into things before potentially offending knowledgeable people who were willing to take their time to help you.

It's pretty hard to judge someone's true character based on a few (or even alot) of posts.

Not sure if your trying to have a dig or not. Signed up and posted in hope of getting some useful feedback from other owners, which in fact I got. The other comments are useless and there's no need for them. I referred to boostcruising for obvious reasons. I thought maybe a website dedicated to specific cars might have been a little different. Maybe your all having a lend and think it's funny? Sorry can't tell, this is text after all. I have stated that positive feedback is appreciated and will continue to thank those who are actually knowledgeable and offering their help.

+1 for BOV not helping the situation.

I have an auto R33 atm and since putting a Blitz atmo on back off it almost stalls. But I live with it for the hektik doses it does :yucky: ..

I'd be pressure testing the system for leaks as they will also create stall issues along with the bov set-up..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To be determined, Luke, to be determined. 馃榿 Definitely the car
    • It might be worth having a good look at the chassis behind the bumper then; most people prefer the series 2 look so it might have been changed to cheaper parts as part of an earlier repair
    • The car itself a series 2. I was just curious about the headlights and just wanted to confirm that they were series 1. Good to know the rest of the front end is series 1. It鈥檒l be easier for me to find parts on the aftermarket side of things lol
    • If you've wired up the coils & injectors properly, & have the neo CAS loom for the trigger, it should all work. The VCT works the same way so just different plugs between s1 & neo. Assuming DBW if no IAC. Don't bother with the stock boost solenoid with g4x.
    • THERE IS NO IAT SENSOR ON ANY SINGLE TURBO RB. And the one on an RB26 is not for "engine control" - it's really too big and too slow and is only used for over-temp alarming (as far as I can tell). Anyway, you don't have one. You want/need one for the Link, then you need to buy one, find a spot for it, and wire it in. You do know that the stock boost solenoid is not capable of "control", right? It is merely on or off, for the low boost (5 psi) and high boost (7psi), which the ECU enforces mostly based on gear. The stock solenoid is not for PWM control and is not plumbed up in a way to provide it. If you want to control boost properly, then you need a proper MAC valve. And yes, you can wire either of them direct to the ECU. Well, I assume you can - I don't know what the boost solenoid pins on the plug and play Link are capable of. They really should be as capable as any normal Link - but seeing as it is plg and play, it might be limited to stock functionality. Read the doco.   You really do just want to plug stuff together without understanding how it works, right? I can't help you there. I don't know the plug types or pinning on half the stuff you're asking about. If I had to do it I would sit down with the wiring diagrams, the car/looms and a multimeter and work out what is what.
  • Create New...