Jump to content
SAU Community

Recommended Posts

Pretty much as the title says. It's and auto s1 stagea but still just a 25. All stock except bov have been plumbed up. had this issue before I did that. Read heaps of forums and did most of the things suggested (cleaning aac etc) afm seems fine but hard to call. Any ideas? It's drivable but will stall out when you back off at a slow rolling speed so I pretty much idle through carparks.

have you set your idle correctly? get the car up to temp stop the car...unplug the tps....start the car...turn the idle screw on the aac valve till you have it idling at 750. turn car off...plug the tps back in.....if it still runs like shit after that it could be your tps.

Cheers badgaz will do that in the morn. Bov has been deleted completely and made a new intake pipe

Why?

Put recirc bov back on.

The reverb screws around with the airflow meter reading leading to the issue you have described.

Well, your initial post isn't particularly clear. I suppose you are in a rush for people to help fix your problem.

Somehow bov plumbed up equals blocked off?

Was it previously the stock bov recirculating as per stock?

I usually pretty much idle through car parks also, lots safer than boosting through them.

Superben. Firstly thanks for a mature comment. the engine was completely stock in every way and had the ssame issue. As for the bov, New intake pipe deleted that line, blocked other lines and put a plate over the bov where it goes into the manifold.

It's not the issue.

As for idling through Carparks I have no issue with that. It's a daily running stock boost. It IS drivable. just any speed below around 50km if you completely release the throttle it will die the revs down to almost a stall.

Productive comments are appreciated. if not fk off to boostcruising. Cheers

Typical as the new guy to a forum you would ease into things before potentially offending knowledgeable people who were willing to take their time to help you.

It's pretty hard to judge someone's true character based on a few (or even alot) of posts.

Not sure if your trying to have a dig or not. Signed up and posted in hope of getting some useful feedback from other owners, which in fact I got. The other comments are useless and there's no need for them. I referred to boostcruising for obvious reasons. I thought maybe a website dedicated to specific cars might have been a little different. Maybe your all having a lend and think it's funny? Sorry can't tell, this is text after all. I have stated that positive feedback is appreciated and will continue to thank those who are actually knowledgeable and offering their help.

+1 for BOV not helping the situation.

I have an auto R33 atm and since putting a Blitz atmo on back off it almost stalls. But I live with it for the hektik doses it does :yucky: ..

I'd be pressure testing the system for leaks as they will also create stall issues along with the bov set-up..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
    • You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
×
×
  • Create New...