Jump to content
SAU Community

Recommended Posts

Hi fellas,

I started this topic to see what kind of results some guys are getting on an engine dyno around the 600hp+ mark. In particular, actual engine torque values and rpm it is achieved (instead of measured by rolling road dyno).

So, anyone tuning on an engine dyno and have some torque figures to share; nothing specific, RB26, RB26, RB30... sorry if this topic is conflicting with the dyno result thread but it it more specific to engine dyno.

Thanks,

Mike

Link to comment
https://www.sau.com.au/forums/topic/442160-rb26rb30-engine-dyno-results-600hp/
Share on other sites

I have only ever heard of maybe two RBs being tuned on engine dynos, one RB25 making ~1400hp and one RB26 making ~1700hp - probably not too helpful for this topic, most people aiming for "only" 600ish are content with a rolling road or hub dyno :)

I have only ever heard of maybe two RBs being tuned on engine dynos, one RB25 making ~1400hp and one RB26 making ~1700hp - probably not too helpful for this topic, most people aiming for "only" 600ish are content with a rolling road or hub dyno :)

600hp+.... they can post it in here!

I know BoostdR had some results, I can't find it however. It was an RB30 with twin -10s that made good strong power.

I don't know of any tuners or engine builders here who have an engine dyno - the only ones I have seen are in a Polytech and one in a place doing research on fuels - which is not to say that there aren't some somewhere. I have seen a video of an Aussie speed shop somewhere that has one.

There are a few in Adelaide; most would not go to the trouble of an engine dyno but IMO it is the best way to tune and run in an engine prior to fitting it to the car. Also the only way to get a true reading of torque (and engine power).

There is one up our way, costs by the time you wire it all up etc are a bit steep, we were thinking to do the run in and basic tune on it and makes life simpler if you want to inspect the engine internally or work on it, in our case we are still unsure if its the right thing for us.

Maybe. maybe not.....

Yeah mine was done in Adelaide prior to me buying it.

2.8l with turbonetics GTK850 25psi on 98 with 10% meth-- 760hp & 780nm @ 5500rpm from memory.

Will try and find the sheet.

Thanks Richard, I will have a look for BoostdR's result somewhere on the forum today too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
    • I'd say it's a fair bet that the feed and return fluid lines will be in different enough spots that you would need to come up with a way to cut the originals short and adapt with new hard line adaption or braided teflon hoses or somesuch. But really, you have the car, you have the photos of the DMAX rack - you should be able to go out there and see for yourself whether they're in the same or different spots.
    • I've been doing some looking around and honestly was just considering throwing a new rack at it. I saw that the dmax silvia rack bolts up into the 33 with the silvia bushings but not sure if the high pressure lines will sit in the correct spot. I believe other version of the 33 rack are the same/similar to the racks that can be opened up without as much fuss so I assume the dmax rack would fit but any ideas?
    • I've never played with one, but I would expect that you are correct. That slot looks like it is intended to be used to unscrew the end, and the flats on the body would be better than grabbing it around the round bit with a pipe wrench. So, yeah, probably unscrews. You'll probably have to make a tool to drive in that slot.
×
×
  • Create New...