Jump to content
SAU Community

Recommended Posts

Seller Details

Name: Michael
Location: Melbourne
Phone: 0424 141 211
Price: $23500.00 Negotiable

Vehicle Details

Transmission: Factory 5MT
Year: 1998
JZX Type: X100 Chaser Tourer V
Colour: 6N9

KM: 123xxx



Additional Details

After a lot of thought I have decided I want to look into getting a cheaper daily/newer car. This is my third X100 and easily the best one that I have owned. It has been very reliable and a rewarding car to drive on the street and also the occasional track day. I received the car almost stock and all of the mods/parts/services have been done by myself or with the JZX guys @ 612 Autoworks. Many parts are less than 5000KM old. I am putting up the car as a complete package, but am willing to negotiate removal of parts for price adjustment. The car currently has rego up until end of May, however a renewal + RWC can be discussed. Here is a list of specs and some photos further down. Please contact me via mobile for any questions.

Maintenance

100k service completed

General service completed Tuesday 28/04/2014

New OEM diff bushes

New Redline transmission fluid

Diff fluid replaced

Refreshed clutch master cyl

New clutch slave cyl

Mods

Power

Blitz K1-450V Turbo

HKS Actuator

Blitz Air Filter

HKS Intake (J-Pipe delete)

Blitz FMIC

Denso 850cc injectors

Walbro 255LP/H fuel pump

Stupid rare Trust DD twin pipe exhaust

Koyorad 2layer copper radiator

Action Stage 3 clutch (Rated to 370rwkw) from US

TRD Radiator cap

HKS F-Con V Pro V3.14 ECU w/3Bar map sensor

Turbotech bleed valve

Tuned by Trent @ Chequered Tuning. Makes 240RWKW & 460NM of torque by 3200RPM (16psi)

Brakes/Susp/Wheels

Znoelli slotted front rotors

Znoelli front pads

Fresh OEM rear pads

Almost new Silkroad RM/A8 coilovers

TRD swaybars

Tom's triangle brace

18x9/10 Blitz BRW 03 rims

Nexen N6000 all 80%+ tread

GSP purple wheel nuts + lock nuts

Interior/Exterior

OEM weathershields

No spoiler boot (no holes)

Rare OEM factory rear visor

TRD gear knob

2x Bride Brix 1.5 seats on genuine superlow rails

Polk audio speakers

Alpine head unit

Alpine 5ch amp

Mongoose M80G 3pt immobilizer/alarm/keyless entry

Things that may need attention in future (I want to be completely honest about condition as the car is a very solid package overall)

Castor arm bushes are a bit cracked

Rear upper arm bush has a bit of play

Rear quarters have inside-out pin dents (common on these cars due to only a single skin panel)

Drivers mirror has a bit of free-play movement

General wear and tear on paint few scratches here and there. Front bar and lip has stone chips etc.

Small scuff on corner of rear bar

Pics (will update with better pics next week, some of these are few months old with different rims)

2ahs5xx.jpg

10s7z4m.jpg

6f39g4.jpg

20z5t7k.jpg

14t8uiu.jpg

2ronpm0.jpgdfgiyo.jpg

2quu3v4.jpg

Swap for a supra ?

Sorry not really looking for a swap. Have my eyes on a car I'd like, so happy to hear offers!

Considering putting stock turbo/ecu/injectors/intake all in to reduce the price a fair bit since ppl seem to want a more standard car.

  • 2 weeks later...

Price drop $19,500ono with standard seats/rims/visor. Am negotiable so please call/msg me with any offers or to arrange an inspection!

Also forgot to add I've just paid 1 year registration :)

Edited by discern
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...