Jump to content
SAU Community

Recommended Posts

just got given some info from the gold coast bulletin about the future of the V8s' at indy..

they need to upgrade the pit area to allow enough room for the number of cars in the championship now! if this upgrade is not done then the V8s will have to be removed from the bill...

they are asking poeple to answer this question:

"Do you support a new pit area on Macintosh island to keep the V8 Supercars at indy?"

All you have to do is SMS yes or no, or provide a comment under 25 words,and SMS it to: 0416905147

you can email your opinion to [email protected]

the problem they are facing is its a park and they need to remove trees (2%) 30 trees in total, it will mean more parking for the area and the V8s' will run at indy in the future.

if you like to go to indy and see the V8s' then let them know!!

Thanks, Matt....

Link to comment
https://www.sau.com.au/forums/topic/44303-v8s-at-indy-300/
Share on other sites

i think they should scrap the V8's and get the amature race/cruise community of the gold coast to replace them..............

the pit stop can be any macca's carpark and bonus points are awarded to neon's and all maner of rice. bonus points for chrome should be awarded on a 'per meter squared' basis. also, however many people you have in your car acts as a points multiplyer. ie, 2 people in the car means 2X points, 4 people means 4X points..............

hell i'll buy a ticket to watch that................at least they'll still drive like nutter in the rain :cheers:

Link to comment
https://www.sau.com.au/forums/topic/44303-v8s-at-indy-300/#findComment-906212
Share on other sites

lol you might be onto something there paladin.

But on a serious note there are more then enough hi-powered import/v8/exotics around here to put on a few good races and would compliment the indy cars nicely.

Inexperianced drivers with no race licenses in performance cars racing eachother would make for good spectator/tv viewing but I’m not sure whoever runs the show would like it :cheers:

maybe some time trials?

PS v8's should be there but only if they race after the indycars so they get rained on for a change :ghost:

Link to comment
https://www.sau.com.au/forums/topic/44303-v8s-at-indy-300/#findComment-906461
Share on other sites

Well I would have to say I enjoy the V8 supercars more than the Indys... Having been to both Indy and Bathurst numerous times, I can say the V8's provide a much more physical and interesting race... They are nowhere near as fast as the Indy's but definately more involving...

IMO

Link to comment
https://www.sau.com.au/forums/topic/44303-v8s-at-indy-300/#findComment-907418
Share on other sites

I'm with strutto, i'm a dedicated V8 supercar fan and watch every race and always attend the QLD 500 (or 300 now). I go to indy for the V8's, the champ cars are pretty cool but if there was no V8's i wouldn't go.

SMS sent!

Link to comment
https://www.sau.com.au/forums/topic/44303-v8s-at-indy-300/#findComment-908621
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...