Jump to content
SAU Community

Recommended Posts

Hi SAU,

I have a 4 gauge wiring kit that needs to run from the battery in the engine bay to the amp in the boot. If anyone has this set up, I'd appreciate if I could drop in and have a look where you ran the cables from the engine bay, and how you mounted the amp in the boot.

I understand most run their wires through a 'hidden' gap near the driver side wheel well, but I'd like to have a look first if it's convenient for anyone. I'm in Newington, so if anyone is nearby (up to say a half hour drive, i suppose?) and has this wiring done on an R34 GTT, I'd love to hear from you

Cheers!

Mick

unfortunately the R34 has the battery on the driver's side instead of the passenger side, so that means you will need to run your power cable along with the rear harness (which isn't ideal).

Run from the battery, into the quarter panel along the harness over the wheel arch then into the cabin through that thick grommet...

Follow that through and line up against the harness running to the rear, cable tying along the way so it's all neat.

Mount amp either on that hump OR on the back seat

Fuse as close as possible to the battery

Earth to anywhere in the boot with a decent sized bolt

easy

  • Like 1

Yeah, i have done mine. As above, through drivers side wheel arch was all power cables.. All speaker wires went down passenger side. I have 2 12" subs in boot with amp mounted behind them.

Loads of cable tying and youll be alright. I'm in Penrith area however have the car apart at the moment so cant drive out to see you. If you wanted to come out and take a look let me know.

Edited by Exodus01

Hey Kyle, I actually came to look at your R33 towards the end of last year, came with my mate and his white S15 - thanks heaps for the offer!

Did you end up taking the wheel and splash guards off to get the wires through?

Ah sweet man, nah didnt have to pull guards off. Theres a grommet you should be able to get to. I've just left my second job so im free weekends now if you need to come out.

Maybe i could come help you when your ready to do it. Either way man

Got a friend named Ryley

HyperSound

U2 1 Roslyn St Liverpool

98222332

www.facebook.com/hypersoundcaraudio

...can mention my name

Not sure if he'll come to you - or that you're close enough to him.

Got a friend named Ryley

HyperSound

U2 1 Roslyn St Liverpool

98222332

www.facebook.com/hypersoundcaraudio

...can mention my name

Not sure if he'll come to you - or that you're close enough to him.

Mick, have you posted in or checked out the Car Audio and Security section??? Link: http://www.skylinesaustralia.com/forums/forum/9-car-audio-security/

Thank you very much for the input, guys - much appreciated! Kyle has kindly offered to help me get through the firewall, and he's only a 20 minute drive down the M4. I did ask a question earlier in the audio thread and got the answers i'm looking for (plus i'm a stringent researcher/googler - I ask all of my stupid questions on the forums) I'm confident with all of the other wiring for the subs. It's not an urgent job either, happy to wait. Cheers!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...